Advertisement
Table of Contents
- 1 Important Safety Instructions
- 2 Additional Safeguards
- 3 Know Your Elektra Health Humidifier
- 4 User Instructions
- 5 Functions
- 6 Steam Volume
- 7 Humidity
- 8 Warm Steam
- 9 Aromatherapy
- 10 Care and Maintenance
- 11 Remote Control
- 12 Trouble Shooting
- 13 After Sales Service
- 14 The Environment
- Download this manual
Advertisement
Table of Contents
Summary of Contents for Electra Health+ 8073
- Page 2 Read these instructions before use and keep them safe. If you pass the appliance on, pass on the instructions too. Remove all packaging, but keep it until you are satisfied. SOLE THERAPY IMPORTANT SAFETY INSTRUCTIONS: When using an electrical appliance, basic precautions should always be followed, including the following: Read all instruction before using this appliance.
- Page 3 Use only normal tap water. Do not add anything to the water (e.g. salt, oils, perfumes, etc …) FOR HOUSEHOLD USE ONLY Additional Safeguards 1. Do not try to repair the appliance yourself. Contact the approved Service Centre for examination and repair. 2.
- Page 4 KNOW YOUR ELEKTRA HEALTH HUMIDIFIER 1. Nozzle 2. Handle cap 3. Handle 4. Water tank 5. Water level senor 6. Air flue 7. Mist tube 8. Water tank cover 9. Transducer 10.Heating element 11.Power cord 12.Aroma box 13.LED display 14.On/off button 15.Mist level button 16.Timber button 17 .
- Page 5 Functions 1. On/Off – Touch the button to turn on and turn off the appliance. Turning on or off the appliance is accompanied by a series of beeps. 2. Timer – The timer can be set for between 1 to 12 hours. 3.
- Page 6 6. Warm Steam – There are 3 heat settings. LOW/MEDIUM/HIGH. When you press the button once, the LOW setting will activate and a heat icon will appear on the screen. When you press the button a second time, the MEDIUM setting will be active and a heat icon will appear on the screen.
- Page 7 Trouble shooting PROBLEM CAUSE SOLUTION Check plug Plug into socket Check power switch Turn on power switch No steam No water in tank Add water Not enough water in tank Add more water Remove tank cover, place the water tank in New machine cool and dry place for 12 hours Peculiar smell steam...
- Page 8 The Environment This appliance is rated at an operating input of 30 – 280w watts. Please consider the environment when disposing of packaging. Recycle wherever possible. When you want to dispose of this appliance please do so responsibly, or contact us to assist with the disposal, or disposal advice.
Need help?
Do you have a question about the Health+ 8073 and is the answer not in the manual?
Questions and answers
My device is more than 3 years old. It’s now giving the error light below when I switch it on and then it switches off. I washed and dried it with no solution. Please advise how I can get the device to work
To fix the error light issue on your Electra Health+ 8073 device that turns off after switching on, follow these steps:
1. Ensure you have followed the instructions properly.
2. Check that the outlet supply is switched on.
3. Confirm that the main supply fuse or circuit breaker has not blown or tripped.
4. Pour out all water in the reservoir and replace the tank correctly.
If the device still does not work after these steps, contact the Service Centre.
This answer is automatically generated
What's the code 003
Where do I find the maximum water line or reservoir line where the amount of water I pour is not supposed to exceed