Power Supply And Electrical Info - Simpson SM1200 Instruction Manual

Sanitizing mister and pressure washer system
Table of Contents

Advertisement

WARNING: Improper connection of the equipment-grounding conductor can
result in a risk of electrocution. Check with a qualified electrician or service person if
you are in doubt as to whether the outlet is properly grounded. Do not modify the
plug provided with the product if it will not fit the outlet installed by a qualified
electrician. Do not use any type of adapter with this product.

Power Supply And Electrical Info

GROUND-FAULT CIRCUIT INTERRUPTER PROTECTION
The pressure washer is factory-equipped with an electrical cord and a Ground Fault
Circuit Interrupter (GFCI) power plug. This device provides additional protection from
the risk of electric shock. This cord should only be connected to an electrical outlet
installed in accordance with local safety regulations. Should replacement of the plug
or cord become necessary, use only identical replacement parts that include GFCI
protection.
NOTE: The power supply must be 120  V, 60 Hz, and a minimum 13.5 amp
dedicated electrical circuit.
A. Inspect cord before using. Do not use if cord is damaged.
B. Keep all connections dry and off the ground.
C. Do not touch plug with wet hands.
D. The pressure washer is provided with a ground fault circuit interrupter built
into the power plug.
If replacement of the plug or cord is needed, use only identical replacement
parts. Contact customer service for proper replacement parts.
WARNING: Test GFCI before each use. DO NOT use pressure washer if test
below fails.
GFCI Test Procedures:
1. Plug GFCI into power receptacle. Indicator light should illuminate.
2. Press test button (X). Light should turn off.
3. Press reset button (Q) for use. Indicator light should illuminate. Do not use if above
test fails.
X
Q
NOTE: The GFCI must be reset each time the pressure washer is connected
to an electrical outlet. Reset by simply pushing the reset button on the GFCI power
plug.
DO NOT USE AN EXTENSION CORD WHILE OPERATING THE PRESSURE
WASHER.
WARNING: To reduce the risk of electrocution, keep all connections dry and off the
ground. Do not touch plug with wet hands.
save these instructions for future use
ASSEMBLY
Sanitizing Mister and Pressure Washing System
W
5 - ENG

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents