JML Beauty Wand Instruction And Safety Manual

Important Safety Instructions
• Before using the Beauty Wand™, please ensure
you have read the instruction manual carefully.
• Store in a dry place and out of the reach of
children.
• Always make sure children cannot reach the
appliance or any of the attachments.
• DO NOT immerse the main unit in water or
any liquid.
• Make sure attachments are completely dry
before attaching to the main unit.
• Make sure the unit is OFF when changing
attachments.
• Make sure the unit is OFF when changing the
battery.
• Make sure the unit is OFF when cleaning.
• Only turn the unit on when trimming, the unit
should be switched OFF when combing.
• Be careful not to over trim.
• Use caution when trimming near the eyes.
• DO NOT use on eyelashes.
• For external use only.
• Use the appliance for its intended use only.
• Please keep these instructions, the sales receipt,
and if possible, the packaging.
• For dry use only - do not use any shaving foam
etc.
• DO NOT immerse in water.
FOLD LINE
Beauty Wand™ Parts
2
1
6
3
4
5
1 Beauty Wand™
2 Trimming Head
3 Shaper
4 Styling Detail Trimming Head
5 Cleaning Brush
6 Battery
7 Carry Case
Using your Beauty Wand™
Hair removal with the Trimming Head
For all designated areas of the body
1
Turn the unit on by pushing the
ON/OFF switch upwards.
2
ON/OFF light for using with light.
3
Place the head directly against the
hair to be removed.
4
Move against the direction of hair growth.
FOLD LINE
FOLD LINE
Attaching the Shaper
1
Ensure the unit is turned OFF.
2
Hold the neck of the main unit.
3
Push the large opening on the shaper
down over the main head, (where the
mould on unit aligns with the head),
and click into place.
4
It is recommended that, for trimming,
the long side is tested first, if this side is
not satisfactory, use the short side.
Trimming with the Shaper
Gently trim unwanted hair: eyebrows, bikini area,
chin, feet, hands, nose, ears and other facial areas.
1
Attach the eyebrow shaper as described
above.
2
Turn the unit on by pushing the ON/OFF
7
switch upwards.
3
Comb, following the natural shape of the
eyebrow, from the widest end to the thinnest
end.
4
Repeat as necessary for thicker eyebrows.
Grooming with the Shaper
Comb eyebrows, nape of neck and sideburns.
1
Ensure the unit is OFF.
2
Attach the shaper as detailed above, the short
side is recommended for grooming.
3
Keeping the unit switched off, comb,
following the natural shape of the eyebrow,
from the widest end to the thinnest.
Replacing Trimming Head
1
Ensure the unit is turned OFF.
2
Hold the neck of the main unit.
3
Unlock trimmer head from main unit.
4
Slot alternative trimmer head into place
and lock.
FOLD LINE