Download
Share
Print this page
  1. Manuals
  2. Brands
  3. BEEK Manuals
  4. Matrix Switcher
  5. BS-1616HB
  6. Manual

BEEK BS-1616HB Manual

4k hdmi matrix switch
Hide thumbs

Advertisement

Quick Links

Download this manual
Enlarged version
4K HDMI Matrix Switch
Packing Contents
The complete matrix switcher package consists of the following
components:
1. 1x Matrix switcher
2. 1x power cable
3. 1x Power adapter
4. 1x RS232 serial communication line
5. 1x manual
6. 1x data CD
7. 1x certificate of conformity
8.1x warranty card
Please check to make sure that our products have not been damaged
during transportation. If there is any damage, please contact your
dealer directly.
Please read this manual thoroughly before use. Please use it
carefully during installation and installation to prevent damage to
the matrix switcher.

Advertisement

loading
Need help?

Need help?

Do you have a question about the BS-1616HB and is the answer not in the manual?

Questions and answers

Summary of Contents for BEEK BS-1616HB

  • Page 1 Packing Contents The complete matrix switcher package consists of the following components: 1. 1x Matrix switcher 2. 1x power cable 3. 1x Power adapter 4. 1x RS232 serial communication line 4K HDMI Matrix Switch 5. 1x manual 6. 1x data CD 7.
  • Page 2 Safe Operation Guide Contents To ensure reliable use of equipment and the safety of personnel, 1. Overview..............1 please observe the following when installing, using and maintaining: 1. Use a single-phase three-wire power supply with a protective 2. The panel button operation instructions......4 ground and ensure that the entire system uses the same protective ground.
  • Page 3 1) Number keys 1.Overview Input and output channel selection keys for setting the input and output channels of audio and video signals or for status The HDM matrix switcher is a high-performance professional recall or for numbers saving, etc. switching device with embedded intelligent control, which is used 2) Function keys to switch each audio and video input signal synchronously or ●SAVE——LCD display save button...
  • Page 4 ●OTO - shortcut corresponding display button 2.The Panel Button Operation Instructions When the OTO button is pressed, the input channel and the output channel are displayed one-to-one (for example, the This manual uses the HDMI0808 matrix as an example to first port is displayed on the first screen).
  • Page 5 2. Press the output channel“3” button,The LCD screen displays 2. Press the output channel “1” button, and its LCD screen will as follows: display as shown below: 3. After the switch is successful, if you need to perform the next 3.
  • Page 6 3. After the operation is successful, the LCD screen returns to display the corresponding channel. Matrix system setup Press the “MENU” menu button and its LCD screen will display as shown below: 2. Press the input channel "1", "2", "3" and "4" keys to switch the matrix identification code freely.
  • Page 7 3.Software Operation Software settings 1.Double-click "Matrix Controller" to open the application, as shown below: The baud rate is 9600. The serial port address you set must be the same as the port address of the connected computer. The matrix identification code you set must be the same as the address when using the serial port control matrix.
  • Page 8 b) One To All l: all command execution buttons Synchronously switch 1 channel of audio and video signals to After selecting the input channel, click to display this channel all output channels (if all outputs are 8 channels), select the on all screens (for example, the 3rd input channel is displayed input channel to be displayed and click “One To All”directly.
  • Page 9 3. After the operation is successful, click “Scene”, (Take saving into Case 1 as an example), click Save Status “1” as shown below: 4. To recall the display of the correspondence between the input and output, directly click on the corresponding Loading Scenario.
  • Page 10 2. Click and directly to enter the scenario and input and ●Storage scene mode 11 operation steps: SAVE-AUDIO-1-1 output channels for which you want to change the name, as ● Recalling the scene mode 1 operation steps: RECALL-1 shown in the following figure: ●...
  • Page 11 3) After the above two conditions are replaced, it still not work. The internal unit may be faulty. Please send it to a professional for repair. 6. If the LCD has no display, the operation does not respond, may be power supply’ abnormal. 7.