iBell Tools MS06-16 Operator's Manual

Hide thumbs

Table Of Contents

Quick Links

Download this manual

Table of Contents

Summary of Contents for iBell Tools MS06-16

Page 2: Table Of Contents
TABLE OF CONTENTS 1. GENERAL POWER TOOL SAFETY WARNINGS ____________3 2. SCREWDRIVER SAFETY WARNINGS _____________________6 3. PRODUCT OVERVIEW ___________________________________8 4. PRODUCT SPECIFICATIONS _____________________________9 5. SETUP __________________________________________________10 6. PRODUCT FUNCTIONS _________________________________13 7. GENERAL OPERATION _________________________________16 8. TROUBLESHOOTING ___________________________________18 IBL MS06-16...
Page 3: General Power Tool Safety Warnings
Keep it away from heat, oil, sharp edges or moving parts.  When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. IBL MS06-16...
Page 4  When servicing a power tool, use only identical replacement parts. Follow instructions in the maintenance section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of shock or injury. IBL MS06-16...
Page 5  Battery of the tools should be recharged only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. IBL MS06-16...
Page 6: Screwdriver Safety Warnings
 Protect the product against heat. Do not place the product in direct sunlight or use or store the product inside cars in hot weather. Doing so may cause the battery to generate heat, explode or ignite. IBL MS06-16...
Page 7 Caution / Warning Wear protective gloves This product is of protection class II. That means it is equipped with enhanced or double insulation. Wear hearing and eye protection Approx. 1.5 hr charging time Indoor use only IBL MS06-16...
Page 8: Product Overview
2. ON/OFF trigger switch 3. Forward/Reverse rotation control 4. Handle 5. Work light 6. Unlock button 7. Indicator lights 8. Flash light 9. ON/OFF slide-switch for Flash light 10. Charging socket 11. Torque setting 12. Charger 13. Charger jack IBL MS06-16...
Page 9: Product Specifications
: TPA-595100VU Rated input voltage : 100-240V~50-60Hz Rated input power : 3.6V Rated output voltage : 5V Rated output current : 1000 mAh Protection class : Class II Charging time : approx. 1.5 hr Weight : 0.08 Kg IBL MS06-16...
Page 10: Setup
 It must not be used for drilling and should not be used for working on materials that are dangerous to health. For safety reasons it is essential to read the entire instruction manual before first operation and to observe all the instructions. IBL MS06-16...
Page 11 The indicator lights show the battery status as below: YELLOW GREEN BATTERY STATUS Fully charged Less than 70% charge Less than charge,i.e, to be recharged IBL MS06-16...
Page 12  Use a suitable bit holder to access areas that are hard to reach. Insert the bit holder into the socket in the same way as the driver bits, then insert a driver bit into the bit holder. IBL MS06-16...
Page 13: Product Functions
2. Move the forward/reverse rotation control switch to the right (as seen from the operator position) in order to use the product in anticlockwise rotational mode. 3. Move the rotation control switch to the centre position to lock the ON/OFF switch and avoid accidental starting. IBL MS06-16...
Page 14 (4) clockwise at the same time until it locks in place.  To change to pistol position, press and hold the unlock button (6) and rotate the handle (4) anti-clockwise at the same time until it locks in place. IBL MS06-16...
Page 15 OFF, slide it to OFF position. AUTOMATIC WORK LIGHT The work light (5) will automatically illuminate by pressing the ON/OFF switch (2). This helps to focus on the work more thoroughly and could work on a not much bright environment as well. IBL MS06-16...
Page 16: General Operation
 Remove blocked and stuck screws by changing the rotational direction.  After use, switch the product off and let it cool down. Check, clean and store the product as described below. IBL MS06-16...
Page 17 WARNING! from the power supply and let the product cool down before performing inspection, maintenance and cleaning work! Only perform repairs and maintenance work according to these instructions! All further works must be performed by a qualified specialist! IBL MS06-16...
Page 18: Troubleshooting
3.2 Use suitable driver operation Only perform the steps described within these WARNING! instructions! All further inspection, maintenance and repair work must be performed by an authorised service centre or a similarly qualified specialist if you cannot solve the problem yourself! IBL MS06-16...
Page 19 Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice. Disposal of an exhausted battery pack. The built-in battery is Li-Ion type. To preserve natural resources, please recycle or dispose of the battery properly.