Witeg Rocker 440 Introduction Manual

Air supply system

Advertisement

Rocker 440
Air Supply System

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Rocker 440 and is the answer not in the manual?

Questions and answers

Summary of Contents for Witeg Rocker 440

  • Page 1 Rocker 440 Air Supply System...
  • Page 3 Important notice This instrument is designed for laboratory usage only. Please read this manual carefully before installing or operating this equipment. The instrument shall not be modified in any way. Any modification will void the warranty and may result in potential hazard. We are not responsible for any injury or damage caused by any non-intended purposes and modifying the instrument without authorization.
  • Page 4 Unpacking When unpacking, notice if the Compressor is in good situation. If not, please contact the distributor or contact us by e-mail: export@rocker.com.tw immediately for assistance. Assembly & Disassembly diagram Position Designation Moisture trap Drain valve Drain valve (Regulator) On/Off switch Air tank Auto stop switch...
  • Page 5 Operation Introduction The system consists of a compressor Rocker 420, air tank , drain valve (Regulator) and moisture trap Air is pumped into air tank by Rocker 420, then goes through pressure regulator / moisture trap. After regulating and filtrating, air goes to where you connect. Stain-less steel air tank possesses a Auto stop switch .
  • Page 6 Ordering Information 167440-11 Rocker 440 Air supply system, AC110V/60Hz 167440-22 Rocker 440 Air supply system, AC220V/50Hz 167440-07 Filter cartridge 167440-62 Repair kit for Rocker 440 EnV2014.09...

Table of Contents