SUMMARY You just acquired one of our machines and all the team of Europe Projection thanks confidence 1. USER MANUAL ............. p. 3 have granted 1.1. Importance of the manual .........p. 3 Manufacturer of professional 1.2. Receivers of the manual ..........p. 3 equipments for paint and fillers, we have put our know-how for 25 years...
1. USER MANUAL 1.1. IMPORTANCE OF THE MANUAL This manual is a key part for the use of your machine. It summarizes the procedures of starting-up, cleaning and maintenance of the device and also the safety instructions you need to observe. Read carefully all the working and safety instructions and the warnings included in this manual before starting your machine.
2. WARNING 2.1. SAFETY Using the machine in an incorrect way or in non-compliance of the safety instructions indicated in this manual can cause death or serious injuries. Read carefully all the working and safety instructions and the warnings contained in this manual before starting your machine.
2. WARNING (continued) 2.1. SAFETY (continued) WORKSPACE • Maintain the workspace clean and clear. • Ambient operating temperature must be from 5°C and 35°C. • Do not use the equipment in a potentially explosive area. • Do not place any potentially inflammable objects in close proximity to the machine. •...
3. YOUR MACHINE 3.1. DESCRIPTION EUROPROLAV washers are powerful and robust washers. They are suitable for use on any type of job. They are equipped with places to roll up the water inlet and lance hoses. With large diameter wheels and a reinforced chassis, they are very manoeuvrable and designed for easy maintenance.
3. YOUR MACHINE (continued) 3.3. IDENTIFICATION OF THE COMPONENTS Water supply hose Lance Engine High pressure hose Pump By-pass Manometer High pressure outlet connection Water inlet quick coupler Oil level cap 202006-445-ENG User manual - EUROPROLAV 15-200, 15-250, 18-280 TH.2...
4. USE OF THE MACHINE 4.1. PREREQUISITES • The connection to the water supply must be made on an inlet with a sufficient flow rate, with a minimum Ø19 hose to be connected to the pump’s quick coupling. • The high pressure hose is connected to the connection at the pump by-pass outlet. •...
5. DEFECTS AND REMEDIES Before loosening the hose, make sure it is no longer under pressure. Defect To check Remedy • The pump sucks air. • Check the suction hoses. Abnormal pressure oscillations • Water supply filter worn, dirty • Clean or change the filter. or clogged.
DECLARES THAT THE EQUIPMENT DESIGNATED BELOW : Trademark : EUROPE PROJECTION Type : Thermal High Pressure Washer Model : EUROPROLAV 15-200 TH.2 / 15-250 TH.2 / 18-280 TH.2 COMPLIES WITH THE ARTICLE: • the R.233-73 article of the Labour Code THE DIRECTIVES : •...
7. WARRANTY CONDITIONS Each product is delivered inspected and tested. We exclude any warranty for visible defects for which the customer did not claim within 48 hours. The equipments sold are covered by the warranty during the period defined by the manufacturer from the date of purchase, the date on the original proof of purchase being authentic and under the conditions defined by the manufacturer.
Page 12
EUROPE PROJECTION - 228, avenue Olivier Perroy 13790 ROUSSET - Tél : +33 (0)4 42 29 08 96 – Fax : +33 (0)4 42 53 44 36 SAS au capital de 400 000 € - RCS Aix-en-Provence B 394 961 510 - NAF 2892 Z - Intracom : FR 54 394 961 510 User manual - EUROPROLAV 15-200, 15-250, 18-280 TH.2 202006-445-ENG...
Need help?
Do you have a question about the EUROPROLAV 15-200 TH.2 and is the answer not in the manual?
Questions and answers