Mpow Streambot 2-In-1 Manual

Table of Contents

Download this manual

Specification:

Bluetooth specification: V3.0

Bluetooth profiles: A2DP and AVRCP

Frequency range: 2.402GHz-2.480GHz

Operating distance: Up to 10 meters

Charging input voltage: DC 5V

Working time:

TX Mode: Up to 8 hours

RX Mode: Up to 6 hours

Charging time: About 2 hours

Dimensions: 51 x 27 x 11mm

Weight: 11.6g

1. TX/RX switch

2. 3.5mm audio socket

3. Micro USB Charging port

4. Multi-function button(MFB)

5. 3.5mm to 3.5mm audio cable

Charging the Mpow Streambot 2-In-1

You must charge the Mpow Streambot 2-In-1 fully before using the product for the

first time.

1. Connect the USB charging cable to the USB charge port of the Mpow Streambot

2-In-1.

Table of Contents

Do you have a question about the Streambot 2-In-1 and is the answer not in the manual?

Page 1 5. 3.5mm to 3.5mm audio cable Charging the Mpow Streambot 2-In-1 You must charge the Mpow Streambot 2-In-1 fully before using the product for the first time. 1. Connect the USB charging cable to the USB charge port of the Mpow Streambot...
Page 2 TX or RX mode cannot be changed after power on. Pairing with a Bluetooth device 1. Before pairing , please make sure the Mpow Streambot 2-In-1 is in TX Mode and within 1 meter to your Bluetooth device 2. Press and hold Multi-function button of the Mpow Streambot 2-In-1 for 9 seconds until the LED indicator light flashes blue quickly.
Page 3 TX or RX mode cannot be changed after power on. Pairing with Bluetooth devices 1. Before pairing, please make sure the Mpow Streambot 2-In-1 is in RX Mode and within 1 meter to your cell phone. 2. Press and hold MFB for 9 seconds until the LED indicator flashes blue and red alternately, the receiver is in pairing mode.
Page 4 Care and maintenance Do not expose the product to liquid, moisture or humidity to avoid the product’s internal circuit being damaged. Do not expose the product to extremely high or low temperature as it will shorten the life of product components, battery or distort the plastic parts. Don’t use abrasive cleaning solvents to clean the product Don’t dispose of the product in a fire as it may cause explosion.