Advertisement
Assembly instruction | LK Bending Tool PAL Multi 16-32 Al
Bending the pipe
Turn the variable matrices into the correct position
for the pipes outer diameter, see dimension on the
top of the loose matrix. Place the pipe between the
two fixed and the loose matrix.
To begin bending, press the lever towards the
handle repeatedly until the pipe has reached the
desired angle.
EN.29.C.42.1904
2 (2)
Once the pipe has been bent, hold the tool with
one hand and pull the lever away from the handle
to release the pipe from the matrices.
NOTE!
1. Mind your fingers when using the tool
to avoid being clamped between moving
parts.
2. Make sure that you use the right matrix for
each pipe dimension. The correct dimension
is specified on each matrix.
3. The LK Bending Tool is designed for LK PAL
Universal Pipe and is not constructed to
bend metal pipes.
Advertisement
