Advertisement
Quick Links
LK Bending Tool PAL Multi 16-32 Al (Art. No. 188 25 11)
Description
The LK Bending Tool is designed to provide a con-
trolled bend of LK PAL Universal Pipe. The bend
angle can be adapted up to 90°. The LK Bending
Tool is intended for use with PAL pipe with an
outer dimension of 16-32 mm.
The following components should
be included in the LK Bending Tool
packaging:
Main unit with handle and lever, 1 pc.
Crossbars, 4 pcs.
Variable matrices in aluminium, 4 pcs.
• 14-16 mm is for dimension LK PAL 16
• 18-20 mm is for dimension LK PAL 20
• 26 mm is for dimension LK PAL 25
• 32 mm is for dimension LK PAL 32
Assembly instruction | LK Bending Tool PAL Multi 16-32 Al
Tool assembly
Take the crossbar for the pipe dimension to be bent
and mount this on the tool by screwing on the
wingnuts on the underside of the tool.
Mount the aluminium matrices for the same
dimension of pipe selected for the crossbar on the
tool by pressing onto the stud bolt.
EN.29.C.42.1904
1 (2)
Advertisement
Summary of Contents for LK Systems PAL Multi 16-32 Al
- Page 1 Assembly instruction | LK Bending Tool PAL Multi 16-32 Al LK Bending Tool PAL Multi 16-32 Al (Art. No. 188 25 11) Description The LK Bending Tool is designed to provide a con- trolled bend of LK PAL Universal Pipe. The bend angle can be adapted up to 90°.
- Page 2 Assembly instruction | LK Bending Tool PAL Multi 16-32 Al Bending the pipe Once the pipe has been bent, hold the tool with one hand and pull the lever away from the handle Turn the variable matrices into the correct position to release the pipe from the matrices.