Advertisement
Quick Links
TEMPERATURE SENSOR INSTALL GUIDE
CHOOSE
STEP
INSTALLATION
1
LOCATION
The IQ Temp is designed to alert you if temperatures drop below 40°F or rise above 100°F.
This early warning may help you protect your valuables, pets and home from extreme heat
or cold in the event of a HVAC or thermostat failure.
Mounting Locations
Ideally suited for a wide range of applications including:
• Bathrooms
• Laundry Rooms
• Basements
*NOTE: Avoid areas that may retain heat, such as furnace rooms or near hot water pipes
SEE REVERSE FOR REMAINING STEPS
This is a quick guide for experienced installers only. Refer to http://dealers.qolsys.com (login required)
SPECIFICATIONS
Features:
Low Temp and High Temp Warning
• Low Temp alarm: Temperature drops below 40F,
restores when temperatures rises above 45F
• High Temp alarm: Temperature rises above 100F,
restores when temperature drops below 95F
Sensor:
• Cover tamper
• Unique ID for each function
• Temperature check every 5 minutes
• Battery checked every hour
Batteries:
(2) -Panasonic CR2032
-Energizer CR2032
-Duracell DL2032
Advertisement
Summary of Contents for smart home IQ Temp
- Page 1 SPECIFICATIONS INSTALLATION LOCATION The IQ Temp is designed to alert you if temperatures drop below 40°F or rise above 100°F. Features: This early warning may help you protect your valuables, pets and home from extreme heat or cold in the event of a HVAC or thermostat failure.
- Page 2 REMOVE STEP STEP STEP INSTALL IN STEP APPLY BATTERY DESIRED ADHESIVE TABS LOCATION LEARN INTO PANEL Place your panel in “Add Sensor” LEARN AS LOW TEMP STEP (40°F) 2A21A1 L:XXXXX Type in “L” DL code for low temp Select “Freeze” as your sensor type and customize settings as desired Click “Add”...
Need help?
Do you have a question about the IQ Temp and is the answer not in the manual?
Questions and answers