Advertisement
Quick Links
Capsule
Capsule model: DNB-1 Plastic Series
DnaBand
Maximum Operating temperature range: 0°C to 50°C
Operating temperature range for Charging: 0°C to 35°C
Maximum Altitude of Operation: 10000 m
IP protection class: IPX7
(Do not immerse in water for more than 30 minutes
and more than 1 metre depth)
1
Welcome to your DnaBand!
Your DnaBand helps you
make healthier choices:
Personalise your shopping with
your DNA
Lifestyle monitoring
Connect and match to friends
To start using your DnaBand,
please download the
DnaNudge App
2
Advertisement
Related Manuals for DnaNudge DNB-1 Plastic Series
Summary of Contents for DnaNudge DNB-1 Plastic Series
- Page 1 Capsule Capsule model: DNB-1 Plastic Series DnaBand Maximum Operating temperature range: 0°C to 50°C Operating temperature range for Charging: 0°C to 35°C Maximum Altitude of Operation: 10000 m IP protection class: IPX7 (Do not immerse in water for more than 30 minutes...
- Page 2 How to turn your DnaBand on/off Press the button once to turn on the DnaBand. The LED will flash red-green-blue to indicate activation. Press and hold the button until the LED flashes red to turn off your DnaBand. To setup your DnaBand, Connect a DnaBand select “Connect a DnaBand”...
- Page 3 Green DNA Bar Your Green DNA Bar DnaBand Synced today 10:00 represents all the products that are recommended for you by your DNA. Green DNA Bar Sitting: 0.5hr But if you sit down for too long, Steps: 6,000 your Green DNA Bar will start to turn amber and some of Green DNA Bar the products will no longer be...
- Page 4 To check if some of your Green products have turned amber, with your DnaBand switched off, move your wrist up and down. GREEN Well done, your Green DNA Bar is fully green. AMBER Some of your green products are no longer recommended for you.
- Page 5 Hold the product with the barcode horizontal, in line with your DnaBand. If necessary, move your wrist a little to focus the scanner beam. Scanning by gesture (Below the wrist) Another way to scan is by turning the DnaBand towards the inner side of your wrist.
- Page 6 Scanning by button The barcode scanner can also be activated by a short button press. Adjust the scanner beam to align with the barcode. After scanning a product, the LED will light to indicate the recommendation. Not recommended for you Recommended for you Caution! Not recommended for you due to sitting time...
- Page 7 If you are buying the product, press the button once while the LED remains lit. If the button is pressed, the LED will flash blue to show that your purchase decision has been stored. If you do not scan a barcode for 2 minutes, the DnaBand will turn off to save battery power (at this point, the red...
- Page 8 Over 70% trait match Exact trait match! If you, or the other person, have had more than one type of DnaNudge test (nutrition, cosmetics, etc), you will be able to match each test. The first LED colour will always indicate the nutrition match.
- Page 9 Syncing your DnaBand with your App DnaBand Turn ON Bluetooth on your phone. Place your DnaBand close to your phone. Switch ON your DnaBand. Open the DnaNudge App, select “Sync now” .
- Page 10 Charging your DnaBand DnaBand battery status can be seen in the App. The LED flashes red when the battery needs to be charged. Remove the Capsule from the DnaBand. Place the Capsule in the charging cradle. LED pulses yellow when charging is in progress.
- Page 11 DnaNudge Limited warrants the Capsule for a period of one year after the date of purchase provided it has been used and maintained in accordance with the instructions for use. If any defect due to faulty materials and workmanship occurs within this one year warranty period, DnaNudge Limited will repair or replace the capsule at its expense.
Need help?
Do you have a question about the DNB-1 Plastic Series and is the answer not in the manual?
Questions and answers