Advertisement
How to build your buggy...
Please check the contents of your box before beginning
to build your Breezeboard PRO Buggy...
1
Seat (1)
2 Arms (2)
3 Arm Holders (2)
4 Velcro Straps (2)
5 Seat Platform (1)
6 Chassis Extender (1)
7 Rubber Protector Pads (4)
8 Short Screws (4)
9 Long Screws (4)
10 Nuts (4)
11 Spanner (1)
12 Allen Key (1)
Need Help? We've made a "Build your buggy" video guide for you...
Please visit:
OK,
1
lets
build
your
buggy...
Attach the 4
Protector Pads
of
Arm Holders.
5
Add
Chassis Extender
to
the
Seat Platform
adjust to the correct
length then tighten
using the
Chassis Length
Adjustment Screw.
General Safety Information
Learn to ride in a safe place on flat ground and away from obstacles. Stop completely before getting off. Ride on even ground. Ride in a
safe and responsible manner. Do not attempt wheelies or tricks that could result in injury. Be aware of pedestrians, obstacles and uneven
ground. Keep your Breezeboard PRO and Buggy clean, dry and free from debris. Be patient and take the time to practice before you ride
in a congested environment. Be considerate to others when using your Breezeboard PRO & Buggy. Please make sure you wear a helmet,
protective clothing such as elbow pads, knee pads and wrist guards and also gloves to protect your hands and fingers when riding.
Don't ride through puddles. Don't allow untrained riders to ride your Breezeboard PRO Buggy. Don't ride in a careless manner as serious
injury could occur from misuse or worse you could break your Breezeboard PRO Buggy. Don't ride on sand or mud, it wont handle and
we dont advise it. Don't ride at full speed for prolonged periods as this can make it difficult for the Breezeboard PRO Buggy to maintain
balance as well as cause unnecessary strain on the Breezeboard PRO components as well as risk your safety. It is not designed for high
speeds. Only one person on the buggy at any one time. Please take your time to understand the controls of the Breezeboard PRO when
the buggy is attached. Maintain safe stopping distances at all times. Maximum load 150kg. Users ride at their own risk.
Breezeboard PRO Limited, Unit 4 Chillfactore, Trafford Quays Leisure Village, Trafford Way, Manchester M41 7JA
Model: Buggy-01
Year of Manufacture: 2017
Chassis
Length
Adjustment
Screw
5
Washers
and bolts
www.breezeboardpro.com/knowledge-base/
2
Rubber
Add
Velcro Straps
to end
to the
Arm Holders
through the
Protector Pads.
6
With buggy upside
down, add your
Breezeboard PRO to
Seat Platform
and
tighten
Velcro
Straps.
Note: If the item is not assembled following the above instructions
there could be risks of accident. Users ride at their own risk.
More information at: www.breezeboardpro.com
2
3
Use the 4
Long Screws
to attach the
Rubber
Arm Holders
place using the 4
the
Spanner
Please ensure
the outside.
7
Flip the buggy back over
and tighten the
Foot
Pad Length Adjustment
Screws
for each side
to complete your
Breezeboard PRO buggy.
1
4
Foot Pad
Length
3
Adjustment
Screws
6
to view it.
4
Nut
Add
Seat
Arms
to the
Platform
using the 4
& secure in
Screws. No nuts required.
Nuts
with
Tighten using the
&
Allen Key.
Nut
is on
How to ride!
Before sitting on the buggy make sure
the Breezeboard PRO is switched OFF.
After that sit on the seat making sure
you are in a comfortable position.
Then raise the arms to the neutral
position where the breezeboard is set
horizontal to the ground. Then switch
on the Breezeboard and you are ready
to go! Always read the General Safety
Information first before riding and
learn controls in a wide open space.
CONTROLS:
Push both handle bars down
to go forward.
Pull both handle bars back to
slow down, stop or reverse.
To turn, push one side down.
7
9
8
10
11
12
to the
Seat
Short
Allen
Key.
Advertisement
