Do you have a question about the MCWD40BB and is the answer not in the manual?
Questions and answers
Leslie Szostak
April 30, 2025
can you operate the dispenser with only the cold button on?
1 comments:
Mr. Anderson
May 16, 2025
Yes, the Magic Chef MCWD40BB dispenser can operate with only the cold button activated. The unit will not dispense hot or cold water until the power switches on the back are pressed, so you can choose to activate only the cold water switch.
This answer is automatically generated
Joe
April 6, 2025
When replacing the bottle. It is not pulling water into the tank and erroring out. I have checked all the hoses and it still wont work. How do i fix this?
1 comments:
Mr. Anderson
April 6, 2025
To fix the water intake issue on the Magic Chef MCWD40BB after replacing the bottle, follow these steps:
1. Make sure the new water bottle is full and properly placed in the cabinet. 2. Remove the plastic cap from the new bottle and clean the outside. 3. Insert the hose into the new bottle and slide the collar down to secure it. 4. Ensure the hose is not kinked or blocked. 5. Confirm that the red and green power switches on the back of the unit are turned on. 6. Wait up to one hour for initial setup if the unit was just set up. 7. If water still does not flow, check if the pump or water tanks may be malfunctioning.
If the problem persists, contact the manufacturer for further assistance.
This answer is automatically generated
Summary of Contents for Magic Chef MCWD40BB
Page 1
Bottom-Loading Water Dispensers (MCWD40BB / MCWD40BW) newair.com Support Email: support@newair.com Manual v1.1...
Page 2
1-855-963-9247 Manufactured For: MC Appliance Corp. 940 N. Central Ave., Wood Dale, IL 60191 USA Magic Chef is a registered trademark of CNA International, Inc. d/b/a MC Appliance Corporation. All rights reserved. NewAir, LLC 6600 Katella Ave, Cypress, CA 90630 Comments/Questions: Support@newair.com...
Magic Chef® Water Dispenser Product Guide Register Your Product Online Register Your Magic Chef® Product Online Today! Take advantage of all the benefits product registration has to offer: Service and Support Diagnose troubleshooting and service issues faster and more accurately...
Magic Chef® Water Dispenser Product Guide Safety Information & Warnings To reduce the risk of fire, electrical shock and/or injury to persons or property please follow basic safety precautions. Be sure to read all instructions before using this appliance and observe the following safety...
Page 6
Magic Chef® Water Dispenser Product Guide Shock Hazard – Electrical Grounding Required This appliance is for indoor use only. • • Never attempt to repair or perform maintenance on the unit until the power cable has been disconnected. • Never remove the round grounding prong from the plug and never use a two-prong grounding adaptor.
Magic Chef® Water Dispenser Product Guide Parts List Top cover LED night light switch LED indicators Heating switch Cold/room temp water switch Cooling switch Cold/room temp tap 10 Power cord outlet Hot water tap 11 Hot water drain plug Water drip tray...
Magic Chef® Water Dispenser Product Guide Installation & Setup Before connecting the appliance to a power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
Page 9
Magic Chef® Water Dispenser Product Guide Operation This unit has been tested and sanitized prior to packing and shipping. During transit, dust and odors can accumulate in the tank and water line. Pour and dispose of at least one quart of water prior to consumption.
Magic Chef® Water Dispenser Product Guide Cleaning & Maintenance Make sure the power switch is in the off position and unplug the unit from the outlet before performing any maintenance or servicing the product. Cleaning the Housing Use a soft, damp cloth to wipe the body clean. Clean the drip tray and storage cabinet as •...
Magic Chef® Water Dispenser Product Guide Troubleshooting Water is leaking. Problem Possible cause Solution Water is leaking. • There may be a leak in the • Unplug the dispenser, remove the water bottle. bottle and replace it. • There may be a leak in one •...
Magic Chef® Water Dispenser Product Guide Limited Manufacturer’s Warranty This appliance is covered by a limited manufacturer’s warranty. For one year from the original date of purchase, the manufacturer will repair or replace any parts of this appliance that prove to be defective in materials and workmanship, provided the appliance has been used under normal operating conditions as intended by the manufacturer.
Need help?
Do you have a question about the MCWD40BB and is the answer not in the manual?
Questions and answers
can you operate the dispenser with only the cold button on?
Yes, the Magic Chef MCWD40BB dispenser can operate with only the cold button activated. The unit will not dispense hot or cold water until the power switches on the back are pressed, so you can choose to activate only the cold water switch.
This answer is automatically generated
When replacing the bottle. It is not pulling water into the tank and erroring out. I have checked all the hoses and it still wont work. How do i fix this?
To fix the water intake issue on the Magic Chef MCWD40BB after replacing the bottle, follow these steps:
1. Make sure the new water bottle is full and properly placed in the cabinet.
2. Remove the plastic cap from the new bottle and clean the outside.
3. Insert the hose into the new bottle and slide the collar down to secure it.
4. Ensure the hose is not kinked or blocked.
5. Confirm that the red and green power switches on the back of the unit are turned on.
6. Wait up to one hour for initial setup if the unit was just set up.
7. If water still does not flow, check if the pump or water tanks may be malfunctioning.
If the problem persists, contact the manufacturer for further assistance.
This answer is automatically generated