Advertisement
Quick Links
CERTAINTEED MACHINE WORKS
VAC-MATIC
INSULATION VACUUM MACHINE
PLEASE READ THIS MANUAL THOROUGHLY BEFORE PUTTING THE
TM
VAC-MATIC
19 INSULATION VACUUM MACHINE INTO SERVICE!
MANUAL
FOR
MANUFACTURED BY:
CertainTeed Machine Works
101 Hatfield Rd.
Winter Haven, Florida 33880
1-800-237-7841
www.certainteedmachineworks.com
TM
19
1 |
P a g e
Advertisement
Summary of Contents for CertainTeed VAC-MATIC 19
- Page 1 MANUAL CERTAINTEED MACHINE WORKS VAC-MATIC INSULATION VACUUM MACHINE PLEASE READ THIS MANUAL THOROUGHLY BEFORE PUTTING THE VAC-MATIC 19 INSULATION VACUUM MACHINE INTO SERVICE! MANUFACTURED BY: CertainTeed Machine Works 101 Hatfield Rd. Winter Haven, Florida 33880 1-800-237-7841 www.certainteedmachineworks.com P a g e...
-
Page 2: Table Of Contents
TABLE OF CONTENTS SPECIFICATIONS …………………………………………………………………………………………………………………………….3 GENERAL ……………………………………………………………………………………………………………………………………….4 SAFETY ……………………………………………………………………………………………………………………………………..5 – 6 OPERATION ………………………………………………………………………………………………………………………………6 – 7 PREVENTIVE MAINTENANCE ………………………………………………………………………………………………….8 – 10 PARTS DRAWING …………………………………………………………………………………………………………………………11 P a g e... -
Page 3: Specifications
VAC-MATIC 19 INSULATION VACUUM MACHINE SPECIFICATIONS: MODEL: 48P-6-19: Six-inch inlet and outlet ports. ALL MACHINES: Kohler gasoline engine – 19 horsepower single cylinder air cooled, 350 CCA battery, heavy duty housing, and fan impeller. HEIGHT: 43.00 inches LENGTH: 42.00 inches WIDTH: 35.00 inches WEIGHT:... -
Page 4: General
GENERAL This introduction is presented to provide a basic description of the function and purpose of the VAC-MATIC 19 insulation vacuum machine. The VAC-MATIC 19 is principally designed to vacuum damaged or contaminated insulating materials generally used for attic insulation. The VAC-MATIC 19 can also be configured for wall spray applications to return scrubbed or recycled material to a blowing machine for remix into new material. -
Page 5: Safety
SAFETY The VAC-MATIC 19 insulation vacuum machine is factory equipped with a material inlet safety door 1. Do not remove this door for any reason! It will close during operation if the vacuum hose comes loose from the inlet port 2. You should always attach the vacuum hose to the front cover 3 by lifting the door and securing the hose with a clamp to the inlet port before you start the machine. -
Page 6: Operation
Avoid vacuuming foreign objects such as screws, nails, pieces of wood, etc. as this will damage the inside of the vacuum machine. Never leave the machine unattended during operation. CERTAINTEED MACHINE WORKS RECOMMENDS THAT THE OPERATOR’S WEAR PROPER SAFETY EQUIPMENT SUCH AS EYE AND EAR PROTECTION AS WELL AS AN APPROVED DUST MASK WHEN OPERATING THE VAC-MATIC 19 INSULATION VACUUM MACHINE. - Page 7 WARNING: DO NOT SMOKE WHEN OPERATING THE MACHINE. WARNING: DO NOT SMOKE OR BE NEAR ANY FLAME WHILE REFUELING THE GAS TANK. DO NOT FILL TANK WHILE THE ENGINE IS RUNNING OR HOT. FUMES FROM FUEL ARE EXPLOSIVE AND CAN BE FATAL. FOLLOW ALL SAFETY PROCAUTIONS WHEN HANDLING ANY TYPE OF FUEL.
-
Page 8: Preventive Maintenance
PREVENTIVE MAINTENANCE Follow the engine manufacturer’s recommendations in the manual that accompanied this manual when the VAC-MATIC 19 machine was first delivered. Check the oil level daily before start up. The battery is maintenance free. Keep battery cable connections tight, clean, and free of corrosion. - Page 9 5. Insert bushing into new impeller. Lubricate shaft with an anti-seize compound and slide onto engine shaft 7 up against the shoulder on shaft. The bushing should bottom out against the shoulder. Line up keyways on shaft and bushing and insert drive key 8. 6.
- Page 10 10 | P a g e...
-
Page 11: Parts Drawing
11 | P a g e...