Protocol; Ftp Server / Client Setup - Verbatim MediaStation Pro Wireless Network Multimedia Hard Drive User Manual

6.15 Protocol

Here you can set up data transfer protocol to access data stored on servers on your network
How to setup
① After turning MediaStation Pro on, press [SETUP] button and go to [SETUP] page.

6.16 FTP Server / Client setup

You can set up for FTP Server / Client.
How to setup
① After turning MediaStation Pro on, press [SETUP] button and go to [SETUP] page.
② Go to the 2nd page and select [Protocol] icon and press [ENTER]
③ Select Protocol you require from the options of SAMBA, NFS, FTP or uPNP
④ Depending on protocol selected enter the required parameters
i) SAMBA Server Address Setting : Select Auto or Manual
ii) SAMBA Server Address : Enter the server address
iii) NFS Server Address : Enter the NFS server address
iv) NFS Shared Folder : Enter the shared folder path.
v) FTP Address : Enter the FTP address
vi) FTP ID : Enter the FTP ID
Use the numeric pad and up/down buttons to select appropriate characters, [PREV] button
allows you to delete entries.
Press [SETUP] button to save the configuration.
② Go to the 2nd page and select [FTP] icon and press [ENTER]
③ Use the numeric pad and up/down buttons to select appropriate characters, [PREV]
button allows you to delete entries.
④ Set the appropriate parameters:
i) FTP Client Local Disk : Enter the HDD path that you will use FTP client disk.
ii) MediaStation Pro FTP Server Setting : Set MediaStation Pro as FTP server.
iii) FTP Server Disk : Enter the HDD path that you will use FTP Server disk.
iv) Server ID : create the Server ID
v) Server Password : create the password to access the FTP server.
vi) Server Port : The default is 21 and you can select a preferable port number.
Press [SETUP] button to save the configuration.
24