Page 1
JH-TX162 Auto-scan Type Multi-frequency Face to face copy Up to different remotes in NEW UNIVERSAL REMOTE CONTROL...
Page 2
(faster than before), as confirm of the correct copy of the code. 5.While the LED is flashing, press the button of the JH-TX162 where you want to store ,the remote'code just copied, until the led will turn off.
Page 3
(faster than before), as confirm of the correct copy of the code. 5.While the LED is flashing, press the button of the JH-TX162 where you want to store, the remote'code just copied, until the led will turn off.
Page 4
3.Place the original remote control to clone in front of the JH-TX162 at a distance of 2-3 cm. 4.Press and retain pressed the original remote control button that you want to copy until the LED JH-TX162 switches on a fixed light and then It stars to emit a double flash every 2 seconds.
Page 5
4.Press and retain pressed the button of the original remote control that you want to copy until the remote's led will turn on NOTE: The seed code of the JH-TX162 can be emitted as with a fix light and then emits a double flash every 2 sec.
Need help?
Do you have a question about the JH-TX162 and is the answer not in the manual?
Questions and answers