Advertisement
Quick Links
Tech Tips
Service Call:
Correctly initiating a plug-in charge on a
408V HyPower
Requirements:
Dedicated 20 Amp outlet
20 Amp Extension Cord (provided
with machine at installation/delivery)
Model(s):
All units with the optional 408V
TM
HyPower
TM
system.
system installed.
1
Advertisement
Summary of Contents for Terex HyPower
- Page 1 Tech Tips Service Call: Correctly initiating a plug-in charge on a 408V HyPower system. Requirements: Dedicated 20 Amp outlet 20 Amp Extension Cord (provided with machine at installation/delivery) Model(s): All units with the optional 408V HyPower system installed.
- Page 2 Tech Tips Tech Tip Safety Rules Danger Failure to obey the instructions and safety rules in the appropriate Operator's Manual and Service Manual for your machine will result in death or serious injury. Many of the hazards identified in the operator’s manual are also safety hazards when maintenance and repair procedures are performed.
- Page 3 The plug-in charge is the primary charging method for the system ensuring the batteries are fully and evenly charged. At a minimum, the HyPower system should be charged at least 3 days per week, with charging occurring every night to maximum energy savings.
- Page 4 Step 3 Plug the locking connector on the extension cord (provided by Terex) into the hybrid system outlet. Then plug the extension cord into a dedicated 120V/20A outlet. Note: No other devices should be powered by the same wall circuit during charging.
- Page 5 Tech Tips Step 4 Once the system checks are complete, the hybrid will begin charging. The red charging light on the long box will light up to indicate that the plug-in charge is active. Note: If the hybrid experiences a fault during the plug-in charge, the hybrid dash light will begin flashing and the red light on the long box will not illuminate.
- Page 6 Tech Tips Step 5 The Red charge light on the long box will remain lit throughout the charging process. Once charging has completed the Red light will turn OFF. Step 6 The truck engine is interlocked from starting during the plug-in charge. Once charging has completed, unplug the extension cord from the long box and the outlet.