Download Print this page

Anywhere Cart AC-SLIM Instruction Manual

Hide thumbs Also See for AC-SLIM:

Advertisement

Quick Links

Recommended Items:
- Protective eye wear
- Wire Cutters
- Drill
- Phillips Drill Bit
Step 1:
Unboxing your cart
1. Wearing protective eye wear,
use wire cutter to cut green straps.
4. With an assistant, carefully lift
container upward & set aside.
AC-SLIM
7. With an assistant, slowly tilt cart
forward while removing cardboard
cart support from underneath.
STOP
Inspect thoroughly
for damage &
DO NOT discard
packing material.
2. Locate & remove screws on lid,
then remove lid & set aside.
5. Inspect cart thoroughly for any
shipping damage or defects.
NOTE:
Any shipping damage claim must be
submitted within 5 business days of delivery.
8. Set cart back down, unlock all
wheels & slowly roll cart off of pallet.
In case of shipping damage,
please call:
888-650-4488 Ext. 104
M-F 8am-4pm PST
or email us at:
info@anywherecart.com
3. Locate & remove screws on each
corner at base of pallet.
6. Apply brakes to both front wheels.
9. Put all packing materials together
and retain for any warranty claims.
AC-SLIM

Advertisement

loading
Need help?

Need help?

Do you have a question about the AC-SLIM and is the answer not in the manual?

Questions and answers

Summary of Contents for Anywhere Cart AC-SLIM

  • Page 1 & set aside. NOTE: Any shipping damage claim must be submitted within 5 business days of delivery. AC-SLIM 8. Set cart back down, unlock all 9. Put all packing materials together 7. With an assistant, slowly tilt cart wheels &...
  • Page 2 Adjustable Dividers Cable Pass-thru Slots Retaining Strip & Locking ER Wheels Thumbscrews Removable Adapter Main Power Switch Baskets Cycle Timer Optional Sync Port © 2015 NSX Technologies, Inc | 42400 Winchester Rd Temecula, CA 92590 888-650-4488 | FAX 951-699-9000 | info@anywherecart.com 225_b_v2...
  • Page 3 Device slots come set at 1” wide and are adjustable Step 2: Adjusting Dividers in 1/2” increments to fit any device width. 1. Using a ruler, measure the thickest part of 2. If your device is thicker than 1”, locate & your device.
  • Page 4 Step 3: Power Adapter Setup 1. Remove basket by pulling forward first, 2. If your device power adapters are “wall wart” then pull upward. style, plug into outlets & skip to step 5. 3. If your device power adapters are “brick” 4.