Sony SS-CN7700 Operating Instructions

Speaker System
Operating Instructions
Thank you for purchasing this product.
Failure to observe the safety instructions
for electric appliances may cause a fire or
serious personal injury.
This operating instructions describes important safety rules to
avoid the risk of injury, as well as the functions and operations of
this unit. Carefully read "For Your Safety" provided in a
separate volume before using this unit. After reading it, be sure to
keep this operating instructions in a safe place for later reference.
E
SS-CN7700
© 2009 Sony Corporation
Printed in Malaysia
Connecting to an amplifier
When connecting to an amplifier, be sure to turn off the power
of the amplifier.
This speaker system has been designed for use with amplifiers or
receivers rated at the specifications identified in this operating
instructions.
CAUTION
Do not send output signals beyond the maximum allowed input
level of the speakers.
Connect the speaker cords to the output terminals (CENTER) of
your component, such as an amplifier.
This unit
• A simple tip to remember to avoid making wrong connections is
to connect the cord with letters or lines to the minus E terminal.
4-150-536-E1 (1)
(1)
CENTER
SPEAKER
AV Amplifier
Placing the speakers
Avoid placing the speakers in the following locations.
• In a hot place or in direct sunlight
• In a dusty place
• In a humid place
• In a place near other players
When placing the speakers on the TV
Attach the supplied pads to the four corners on the bottom of each
speaker, and place the speakers such that they are evenly balanced
on the TV.
CAUTION
• Do not place magnetic stripe cards, such as cash cards and
commutation tickets, near the speakers. The magnetic field of the
speakers may erase the information on the magnetic stripe.
• The system is heavy and needs to be placed on a solid level base
with sufficient rigidity. Insecure installation may cause the
system to fall, causing serious injury.
Notes on use
Pay attention to the position of the volume control on the amplifier
not to exceed the allowable level of input.
An extremely large sound output may damage the speakers.
Turning on or off the amplifier or the program source
Set the volume of the amplifier to the minimum level.
If the bass sound is imperceptible or the sound source position
of a musical instrument is unclear
Check whether the plus (+) or minus (-) terminal of each speaker
cord is properly connected.
Cleaning the cabinet with care
• Wipe it with soft dry cloth (non-starched). (Do not ever use a
scrubbing brush or sponge.)
• To maintain the continued polish of the cabinet, do not wipe it
vigorously right from the start, but first brush away dust with a
soft brush or a duster before you wipe it with soft dry cloth.
• If it is stained with oil or fingerprints, breath on the surface and
wipe it with soft dry cloth.
• If the stain is tough to remove, wipe it with soft cloth washed in
lukewarm soapy water. (Do not use a neutral detergent.)
• Do not use thinner, benzene, alcohol, or hair liquid, which may
damage the surface.
• Be careful not to scrape the cabinet.
• Be careful not to drop a lit cigarette or match, as it may damage
the surface.
To prevent damage to the speakers
Do not disassemble or modify each speaker unit, network, or
enclosure.
Pads