Troubleshooting - Silvercrest SRH 5 B2 Operating Instructions And Safety Instructions

Troubleshooting

If you cannot connect the radio to a compatible Bluetooth
proceed as follows:
♦ Make sure that the Bluetooth
device .
♦ Make sure that the Bluetooth
switched on .
♦ If you use several external playback devices, ensure that any previously
made connection is disconnected . There may be a previously paired play-
back device still within range .
♦ Make sure that the radio is no more than 10 metres from the external
playback device and that no obstacles or electronic devices are placed
between them .
The following table helps to identify and rectify further possible faults:
Fault
There is nothing on
the display .
1
No sound .
■ 66 GB │ IE
│
Possible cause
The mains adapter is not
correctly connected .
The mains socket is not
supplying any power .
The device is not switched
on .
The volume is set to mini-
mum .
In AUX IN mode, the exter-
nal playback device is not
turned on .
In AUX IN mode, the
external playback device
is muted .
In AUX IN mode, the
audio cable is not properly
connected to the AUX IN
socket .
w
function is activated on the playback
®
function is activated and the radio is
®
Remedy
Make sure that the mains adapter is
correctly connected with the mains
adapter connection
mains socket .
Check the house fuses .
Switch on the device by pressing the
button .
2
Increase the playback volume with the
VOLUME |
dial .
6
Switch on the external playback
device .
Unmute the external playback device .
Make sure the audio cable is correctly
connected to the AUX IN socket
playback device,
®
and with a
r
ENTER / SCAN
.
w
SRH 5 B2