Download Print this page

L.L.Bean Vintage Cedar Manual

Adirondack chair

Download this manual

VINTAGE CEDAR ADIRONDACK CHAIR

Thank you for purchasing our Vintage Cedar Adirondack Chair. Assembly of this

product requires an adjustable wrench and a Phillips screwdriver. We have found it

helpful to have a second person present in at least one step of the assembly.

0DUM5061907

Need help?

Do you have a question about the Vintage Cedar and is the answer not in the manual?

Page 1 VINTAGE CEDAR ADIRONDACK CHAIR Thank you for purchasing our Vintage Cedar Adirondack Chair. Assembly of this product requires an adjustable wrench and a Phillips screwdriver. We have found it helpful to have a second person present in at least one step of the assembly.
Page 2: Tools Required
PARTS Identify all parts using diagram below Screw (9 pcs) Seat Back Support Screw (10 pcs) Front Legs Bolt & Nut (2 pcs) Preassembled Seat Back Bolt & Nut & Washer (4 pcs) Left & Right Armrests TOOLS REQUIRED Adjustable Phillips Screwdriver Wrench...
Page 3 STEP 3 Using the nine (A) screws, attach the seat back support to the preassembled seat back as shown in figure 3. figure 3 STEP 4 Using the four (D) bolts, washers and nuts, attach the front legs to the preassembled base as shown in figure 4.
Page 4 STEP 6 Using the two (C) bolts and nuts, attach the left and right armrests to seat back support as shown in figure 6. figure 6 STEP 7 Attach armrests to the legs. Using four (B) screws, attach armrests to front legs from the inside of the armrest as shown, using the pre-drilled holes as shown in figure 7.
Page 5 CARE Your stained chair is finished with an oil based stain. To clean, wipe accumulated dirt with warm water and a soft cloth; risen thoroughly with clean water. Decks, porches and patios are the best locations for outdoor use. For best results, do not place directly on the lawn.