Related Manuals for Cooke & Lewis CLBFZ60
Summary of Contents for Cooke & Lewis CLBFZ60
- Page 1 Built under freezer CLBFZ60 Barcode: 5052931675692 Warning! Read the instructions before using the appliance.
- Page 2 Scope of delivery Built under freezer CLBFZ60 [A] x 1 [B] x 1 [C] x 2 [D] x 2 [E] x 2 [F] x 2 [G] x [H] x Main unit Flange screws Ice cube tray Nuts Mounting bracket Screws...
-
Page 3: Table Of Contents
Let's get started... These instructions are for your safety. Please read through them thoroughly before use and retain them for future reference. Getting started… Safety Your product Before you start more detail… Operation Care and maintenance Troubleshooting Recycling and disposal Technical and legal information Guarantee CE declaration of conformity... -
Page 4: Getting Started
Safety Built under freezer CLBFZ60 These instructions are for your safety. Please read through them thoroughly prior to installation and retain them for future reference. All installation work must be carried out by a competent person or qualified electrician. This appliance must be installed correctly by a qualified person, strictly following the manufacturer’s instructions. - Page 5 Safety Built under freezer CLBFZ60 Check the appliance for any signs of transport damage. If you notice any damage, do not connect your appliance to your mains supply and then contact your supplier. Your appliance contains R600a refrigerant, which is a natural gas that does not contain CFCs that can damage the environment.
- Page 6 Safety Built under freezer CLBFZ60 Packaging material should be kept away from children. If you are discarding the appliance, pull the plug out of the socket, cut the connection cable (as close to the appliance as you can) and remove the door to prevent children playing from suffering an electric shock or from closing themselves inside it.
- Page 7 Built under freezer CLBFZ60 WARNING! If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. WARNING! Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear or obstruction.
- Page 8 Built under freezer CLBFZ60 If the refrigerant circuit should be damaged: - Avoid opening flames and sources of ignition. - Thoroughly ventilate the room in which the appliance is situated. It is dangerous to alter the specifications or modify this product in any way.
- Page 9 Built under freezer CLBFZ60 be sure to apply A.C. Automatic voltage regulator of more than 350 W to the fridge. The fridge must employ a special power socket instead of common one with other electric appliances. Its plug must match the socket with ground wire.
- Page 10 Built under freezer CLBFZ60 Keep burning candles, lamps and other items with naked flames away from the appliance so that do not set the appliance on fire. The appliance is intended for keeping food stuff and/or beverages in normal household as explained in this instructions booklet.
- Page 11 Built under freezer CLBFZ60 It is advisable to wait at least four hours before connecting the appliance to allow the oil to flow back in the compressor. Adequate air circulation should be around the appliance, lacking this leads to overheating.
-
Page 12: Your Product
Your product Built under freezer CLBFZ60 Your product Note! It is important that none of the drawers are overloaded. Overloading can break the drawers and reduce the appliances performance due to poor air circulation. Frozen food drawers Ventilation grills Thermostat control dial... -
Page 13: Before You Start
Before you start Built under freezer CLBFZ60 You will need (not supplied) Installation guide located at the end of the guidebook We advise when installing this appliance two people are recommended. Things to check before you start To avoid the risks that are always present when you use an electrical appliance, it is important that this appliance is installed correctly and that you read the safety instructions carefully to avoid misuse and hazards. -
Page 14: In More Detail
Operation Built under freezer CLBFZ60 Product functions Before switching on • Make sure that it has been installed by a suitably qualified person, as per the information contained in installation instructions. • After delivery, wait for 4 hours before connecting the appliance to the mains supply. - Page 15 Operation Built under freezer CLBFZ60 Product functions • The thermostat automatically regulates the temperature inside the freezer, depending on what number you have turned the thermostat control dial to: Position <0> means that the appliance is off and all indicator lights are off.
- Page 16 Operation Built under freezer CLBFZ60 The freezer drawer Note! The freezer drawers are suitable for freezing fresh food and storing frozen food and deep-frozen food for a long time. Freezing fresh food • Temperature of the freezer drawer must have already reached -18 °C (or lower) before storing frozen food or freezing fresh food.
- Page 17 Operation Built under freezer CLBFZ60 The freezer drawer Warning! In the event of accidental defrosting, for example, the power has been off for longer than the value shown in the technical characteristics chart under "rising time", the defrosted food must be consumed quickly or cooked immediately and then re-frozen (after cooked.)
- Page 18 Operation Built under freezer CLBFZ60 Saving energy when using your freezer Installing • Install the appliance in a cool position. If it is placed in direct sunlight or next to an oven or other heat source, the energy consumption can increase substantially.
-
Page 19: Care And Maintenance
Care and maintenance Built under freezer CLBFZ60 Care and maintenance Warning! Please ensure that your appliance is disconnected from your mains supply before attempting to clean it. • Do not clean the appliance by pouring water onto it or spraying water over it. -
Page 20: Troubleshooting
Care and maintenance Built under freezer CLBFZ60 Troubleshooting Note! Do not place food back in the freezer compartment once it has started to thaw. Warning! Do not use mechanical devices (e.g. hair dryer) or other means to accelerate the defrosting process, other than those recommended by the manufacturer. - Page 21 Troubleshooting Built under freezer CLBFZ60 Heavy build-up of frost, possibly also on the door seal • Carefully warm the leaking sections of the door seal with a hair dryer ( on a cool setting). At the same time, shape the warmed door seal by hand so that it sits correctly.
-
Page 22: Recycling And Disposal
Recycling and disposal Built under freezer CLBFZ60 Technical and legal information Recycling and disposal Environmental protection Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. -
Page 23: Guarantee
Guarantee Built under freezer CLBFZ60 Guarantee This appliance is covered by a full manufacturer’s month parts and labour guarantee and covers all parts and labour costs associated with the repair of the appliance in a domestic environment. We will repair any defect that arises due to faulty materials or workmanship and use genuine manufacturers parts. - Page 24 Guarantee Built under freezer CLBFZ60 Guarantee Exclusions to the guarantee (continued) Claims arising from non-domestic use or commercial environment. Any gas appliance not fitted by a gas safe qualified installer. If no fault is found then GAA reserves the right to charge for the call out at the going rate of £55.00 plus VAT.
-
Page 25: Ce Declaration Of Conformity
CE declaration of conformity Built under freezer CLBFZ60 CE declaration of conformity MANUFACTURER: CATA ADDRESS: C/ Ter nº 2, Torelló 08570 - Barcelona (Spain) We hereby certify that the mentioned accessory complies with the essential require- ments of the European Directives applicable, including their modifications and the corresponding transpositions from the national law. -
Page 26: Installation
Installation Dimensions Min 550 mm The appliance must be placed on a level floor. Use the levelling feet to take into account any minor unevenness in the floor. Dimensions of appliance Dimensions of aperture* Height: 820 – 870 mm Height: 825 – 875 mm Width: 596 mm Width: 600 mm Depth: 543 mm... - Page 27 Positioning Note! When you install your appliance it is important to bear in mind its climatic rating. It is advisable that your appliance is only installed in a location where the ambient temperature of the room, corresponds with the climate classification that is stated on the rating plate of your appliance.
- Page 28 Reversing the door • This procedure MUST be completed before the cabinet door is attached. • Any parts that you remove from the appliance whilst reversing the door, should be retained for later use. Warning! Take care when opening the hinges, they are sprung loaded and there is the risk of injury if they close on your hand.
- Page 29 Note! Check that the door opens and shuts correctly, without fouling, after you have completed the door reversal process. After the door has been reversed, you should check the door seal of the appliance. The seal should not be creased or crushed; otherwise there will be a gap between it and the inside of the door.
- Page 30 Attaching the plinth/kickboard 25 mm When the appliance has been placed underneath the worktop, you may decide to attach a plinth or kickboard to match your existing kitchen units. • If the niche for appliance has a height of A = 820 mm and a plinth height of a = 100 mm, the plinth can be fitted without any modification.
- Page 31 Mounting the cabinet door to the appliance [E] x 2 a) Remove the cover caps from the top of the freezer door and screw the two flange screws [E] into the place.
- Page 32 Mounting the cabinet door to the appliance [C] x 2 [G] x 2 130 mm 130 mm Measure the width of the cabinet door, at the halfway point mark a line vertically down the inner surface of the cabinet door. You should draw the line from the top of the cabinet door to approximately halfway down.
- Page 33 Mounting the cabinet door to the appliance [F] x 2 Hang the cabinet door onto the appliance door, then tighten with the nuts [F]. [D] x 2 [G] x 2 [H] x 2 Fix the two brackets [D] to the underneath of the appliance door using screws [H], then fix the brackets to the bottom of the cabinet door using screws [G].
- Page 34 Mounting the cabinet door to the appliance Align the cabinet's door to those on the neighbouring units by adjusting the position of the brackets to the cabinet door.
- Page 35 Fixing the appliance to the cabinet [G] x 3 Open the appliance door. Use a suitably sized drill bit to drill through the three holes in the bracket, into the work top. Note! The drill bit should be appropriate for the material that your work top is made from.
- Page 36 B&Q plc, Chandlers Ford, Hants, SO53 3LE United Kingdom www.diy.com...