Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for StarTech.com S251BMU3FP
- Page 1 USB 3.0 Fingerprint Encrypted Drive Enclosure | For 2.5” SATA SSDs/HDDs Actual product may vary from photos User Manual SKU#: S251BMU3FP For the latest information and specifications visit www.startech.com/S251BMU3FP Manual Revision: 02/06/2020...
-
Page 2: Compliance Statements
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual... -
Page 3: Safety Statements
• Montering av kabelavslutningar får inte göras när produkten och/eller elledningarna är strömförda. • Kablar (inklusive elkablar och laddningskablar) ska dras och placeras på så sätt att risk för snubblingsolyckor och andra olyckor kan undvikas. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support... -
Page 4: Table Of Contents
Changing the Master Password ......................16 Fingerprint Setup ............................16 Renaming a Fingerprint Scan ....................... 18 Deleting a Fingerprint Scan........................18 Forgetting the Current Password ......................19 LED Indicators ..................19 To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support... -
Page 5: Product Diagram
Product Diagram Exterior View LED Indicators (Ready, Error, and Wait) USB Micro-B Port Fingerprint Pad Disk Access LED To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support... -
Page 6: Interior View
Interior View SATA Hard Drive Connector Hard Drive Mounting Screw Holes (x 2) To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support... -
Page 7: Product Information
• User Manual x 1 • Requirements 2.5” SATA SSD or HDD • Host Computer with either a USB-C or USB-A port • Default Password = startech • To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support... -
Page 8: Hardware Installation
Using the Micro Screwdriver (included), remove the two Enclosure Screws from each of the sides on the Drive Enclosure. Removing the Enclosure Screws Slide the Drive Slot from the Drive Enclosure. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support... - Page 9 Flip the Drive Slot over, to expose the SATA Hard Drive Connector. Flip over the Drive Slot angle, slide the Hard Drive into the SATA Hard On a 30 Drive Connector. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support...
- Page 10 Gently push down on the Hard Drive securing it into the SATA Hard Drive Connector. Flip the Drive Slot over and insert two Hard Drive Mounting Screws into the two Hard Drive Mounting Holes. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support...
- Page 11 Cutout. Insert the Enclosure Screws into the side of the Drive Enclosure. Using the Micro Screwdriver tighten the Enclosure Screws. Be careful not to over-tighten the Enclosure Screws. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support...
-
Page 12: Software Operation
USB port on the Host Computer) to the USB Micro-B Port on the Drive Enclosure and to a USB port on the Host Computer. Software Operation Navigation and Icons FTP Tool Home Screen To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support... - Page 13 • Allows you to reset the connected Hard Drive to default factory settings. • Shows that a Hard Drive is correctly connected to the Drive Enclosure. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support...
- Page 14 Fingerprint Management Screen Screen Element Description • Allows you to add/create a new fingerprint scan. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support...
-
Page 15: Formatting The Hard Drive
Click FTP Tool from the list, to connect to the Drive Enclosure. The FTP Tool Home screen will appear. Click on the Disk Button. Click the Restore to the Factory Default Settings button. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support... - Page 16 Click the OK button. When you navigate back to the File Explorer screen, you will see two drive listings, one will be the emulated drive BD-ROM Drive FTP Tool and one will be the new blank drive. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support...
-
Page 17: Changing The Master Password
Enter the Administrator Password and click the OK button. If you have not previously changed the password, the default password is startech. The Fingerprint Management screen will appear. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support... - Page 18 Completed Fingerprint Scan When the Recording Process reaches 100% click the OK button to register the fingerprint. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support...
-
Page 19: Renaming A Fingerprint Scan
If you have not previously changed the password, the default password is startech. The Fingerprint Management screen will appear, listing any registered fingerprint scans. Click on the fingerprint from the list you want to delete. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support... -
Page 20: Forgetting The Current Password
LED Indicators There are three LED Indicators on the top of the Drive Enclosure Ready, Error, and Wait. The Following table describes the function of each LED Indicator. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support... - Page 21 Wait • Flashes Blue: Indicates that the fingerprint pad is ready to scan a fingerprint. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support...
- Page 22 Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
- Page 23 StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology parts. StarTech.com was founded in 1985 and has operations in the United States, Canada, the United Kingdom and Taiwan servicing a worldwide market.
Need help?
Do you have a question about the S251BMU3FP and is the answer not in the manual?
Questions and answers