Advertisement
Getting Started
Battery Installation
ATTENTION: Batteries should only be installed by an adult.
1. Open the battery compartment door located on the back of
the unit.
2. Install 4 "AA" (R6) size batteries, making sure that the +
and – polarities match the diagram printed inside the battery
compartment.
3. Close the battery compartment door and tighten the battery
door screw. Do not over-tighten.
For the Best Possible Performance
• We recommend the use of alkaline batteries for longer life.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium) batteries.
• Only batteries of the same or equivalent type
recommended are to be used.
• Batteries are to be inserted with correct polarity.
• Remove exhausted batteries from the unit.
• Do not attempt to recharge non-rechargeable batteries.
• Remove the rechargeable batteries from the unit before
charging (if removable).
• The supply terminals are not to be short-circuited.
• Batteries should be removed if the item will not be used
for an extended period of time, such as a month or longer,
to prevent battery leakage or damage.
• Rechargeable batteries should only be recharged under
adult supervision (if removable).
Remove Demo Tab
The
Barbie™ Guitar
demonstration purposes. Make sure to remove this tab. To
do so, gently pull on tab. Dispose of tab properly.
Bottom View
Demo Tab
Carrying Strap Installation
1. Attach the strap ends to the Guitar body.
2. Hang it onto your shoulder.
3. Adjust the strap length to fit you.
has a demo tab for in-store
Reset Button
Advertisement
