Introduction; Preparation For Removal And Disassembly; Replacement Parts - Ecotechnics XK360 Service Manual

The data, information and descriptions, and the technology described herein are the exclusive intellectual property of Ecotechnics S.p.A. and constitute industrial
secrets. Said information is communicated in strict confidentiality; said information may be used only for the purpose for which it is communicated; said information
may not be divulged, communicated, or revealed to third parties and/or reproduced by any means for any reason whatsoever; said information is protected under
applicable Italian competition and industrial property law.

INTRODUCTION

This manual was produced by the manufacturer primarily for use by dealers and their qualified
A/C system technicians. It is not possible to include all the knowledge of a mechanic in one
manual. Therefore, anyone who uses this book to perform maintenance and repairs on service
stations should have a basic understanding of mechanics and the techniques to repair these
types of machines. Repair and maintenance work attempted by anyone without this knowledge
is likely to render the service station unsafe and unfit for use. This model has been designed
and manufactured to perform within certain specifications in regard to performance. Proper
service with the correct tools is necessary to ensure that the service station will operate as
designed. If there is any question about a service procedure, it is imperative that you contact
the dealer for any service information changes that apply to this model. This policy is intended
to provide the customer with the most satisfaction from his service station. The manufacturer is
continually striving to improve all of its models. Modifications and significant changes in
specifications or procedures will be forwarded to all authorized dealers and will appear in future
editions of this manual where applicable. Please read this material carefully. Designs and
specifications are subject to change without notice.

PREPARATION FOR REMOVAL AND DISASSEMBLY

1. Before removal and disassembly, eliminate all dirt, mud, dust and foreign material.
2. Use only the proper tools and cleaning equipment.
3. During disassembly, clean all of the parts and place them in trays in the order of
disassembly. This will speed up assembly and allow for the correct installation of all parts.
4. Keep all parts away from any source of fire.

REPLACEMENT PARTS

Use only genuine manufacturer parts for all replacements, contact the dealer for the complete
list. Other brands may be similar in function and appearance, but inferior in quality, and not
designed for that specific use.
Service manual VA500-VA750 ed.1 ver.5.05 [MANU360.SA0].doc pag.5 - 18/10/2005