Huawei S2700 Series Quick Start Manual page 4

For a wall-mounted switch (S5720-16X-PWH-LI-AC needs to be installed with the port side facing up), take
water-proofing and dust-proofing measures to protect the switch from damage caused by water and dust.
Ensure that there are no flammable or explosive materials near the switch and no obstructions within 100 mm
around the switch.
S3700-HI, S5700-HI, S6720S-EI, and other 420 mm or deeper switches cannot be wall mounted.
The expansion bolts need to be purchased separately.
Installation Procedure
Step 1 Use M4 screws to fix the mounting brackets on both sides close to the port side.
Step 2
Use a hammer drill with φ8 drill bit to drill holes
on the wall, and fix the switch on the wall with
expansion bolts.
Step 3
Connect the ground cable to the ground point.
Scenario 3: Top Wall Mounting
Before You Start
Before drilling holes in a wall, make sure there are no power cables in the wall to avoid electric shock.
Only the S5720-16X-PWH-LI-AC can be installed on the top wall.
Expansion bolts and top-mounting brackets must be self-provided.
Installation Procedure
Step 1 Mark the positions to drill holes according to the switch's size and positions of top-mounting brackets.
Step 2 Use M4 screws to attach two top-mounting brackets to the switch.
Use a hammer drill (with φ8 drill bit) to drill holes, and use expansion bolts to secure the switch on the top
Step 3
wall.
Step 4 Connect the ground cable to the ground point.
1 8
0 m
3 6 0 m m
m
Expansion bolt
P o r t s i d
3
d o w n
e f a c e s