Summary of Contents for Adkins Fog1250
- Page 1 User’s Manual (330) 436-3260 Fax: (330) 436-3283 E-mail: support@adkinsprolighting.com www.adkinsprolighting.com...
- Page 2 Always ensure that the structure to which you are attaching the unit is secure and is able to support a weight of 5 times the unit’s weight. Caution! No user serviceable parts inside do not attempt repairs. In the event your FOG1250 Fog Machine should fail, contact Adkins Pro Lighting. Introduction FOG1250...
- Page 3 Weight: 6.2lb(1pc/CTN) Operation Place fog machine on a level flat surface, remove fog liquid tank cap. Fill with Adkins Lighting Brand Fog Fluid. Lower quality fluid can damage the unit. When filled, place cap back on liquid tank.
- Page 4 Tools: Clean lint free cloth, coffee filter or similar fine mesh filter cloth, plastic or glass container larger than the reservoir size (do not use metal), distilled water and Adkins Lighting Brand Fog fluid. Cleaning Directions: Allow the smoke machine to cool down enough to be able to handle the machine.
- Page 5 instructions printed on the exterior of your fog machine. Use only the high quality, Adkins Lighting Brand, water based fog fluid in the machine. Always make sure there is sufficient liquid in the fog liquid tank. Operating this unit without liquid will cause damage to the pump and or heater.
Need help?
Do you have a question about the Fog1250 and is the answer not in the manual?
Questions and answers