Advertisement
Quick Links
INSTRUCTION MANUAL
INDUSTRIAL BLENDER - Ti25-81.571.00852-A
* Please read these instructions carefully before operation this appliance.
IMPORTANT SAFEGUARDS
When using electrical appliances, basics safety precautions should always be observed
including the following:
- Before connecting your blender check if voltage of your power system
corresponds to the same specified on the appliance.
- To protect against risk of electrical shock, do not put cord, plug, base or
motor in water or other liquids.
- Never connect two or more appliances in the same plug.
- When not in use, unplug the blender.
- Avoid starting blender empty.
- Avoid contact with moving parts because blades are sharp. Handle carefully.
- Keep hands and utensils out of container while blending to prevent the
possibility of severe personal injury and or damage to blender. A plastic spatula may be
used but only when blender is "NOT RUNNING".
- Only tilt the container when blender "COMPLETELY STOPPED".
INSTRUCTIONS FOR USE
- Blender control is made by switch ( ON - OFF)
- It is recommended to cut food in small pieces and maintain food below frieze
height to avoid spilling.
- To start blender place small quantity of food before connecting it, and afterwards complete
container.
- When blender is running do not remove the lid.
- If blender action stops, turn blender off. Remove lid and use a plastic spatula
to push mixture toward blades. Replace lid and continue.
CLEANING PROCEDURE
- Clean container (cup) with liquid soap and water filling to half capacity.
- Turn on blender for some seconds.
- Turn off blender, empty the container and rinse it.
- Unplug blender clean body and external cup with a wet cloth.
- Do not use harsh detergent or chemical products for cleaning.
- Never use water jet or immerse appliance in water.
- Wipe off appliance switch a dry cloth and wait at least half an hour before re-conneting to
the main power outlet.
AMERICA PARTS & TOOLS, INC
8409 NW 68th St
Miami, FL 33166
PH: +1-786-5369960
email: info@americapartstools.com
TI25
TI25
TI25-81.571.00852-A
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for AMPTO TI25
- Page 1 INSTRUCTION MANUAL INDUSTRIAL BLENDER - Ti25-81.571.00852-A * Please read these instructions carefully before operation this appliance. IMPORTANT SAFEGUARDS When using electrical appliances, basics safety precautions should always be observed including the following: - Before connecting your blender check if voltage of your power system corresponds to the same specified on the appliance.
- Page 2 Underfriction Washer 21.940-3 Rubber Ring Screw 18.813-3 Knife 37.015-3 Foot 37.021-3 Technical Data 18.983-3 Washer 37.058-3 Chuck Nut TI25-81.571.00852-A 37.062-3 O’ Ring 37.154-3 Bushing Voltage (V) 127 (60 Hz) 2.190-3 Wiring Conector Power (HP) 1 ½ Amperage (A) 18.0 Speed (rpm)
Need help?
Do you have a question about the TI25 and is the answer not in the manual?
Questions and answers