1. Manuals
  2. Brands
  3. Southern Recreation Manuals
  4. Play Sets & Playground Equipment
  5. Park Central Playgrounds Camel Back 80650600...
  6. Installation manuallines

Southern Recreation Park Central Playgrounds Camel Back 80650600 Series Installation Manuallines

Climber
Hide thumbs
1
2
3
4
5
Table of Contents

Advertisement

Quick Links

Download this manual
USER GROUP: 5 - 12
RECOMMENDED CREW: 2 people

TOOLS REQUIRED:

T-45 TORX tool (supplied by manufacturer)
Level
3/8" allen head tool
Tape measure
Auger / Post hole digger / Shovel
21/64 drill bit
High speed 3/8" electric drill w/clutch
NOTE: Use of any other driver may result in damage to tool and/or hardware!
INSTALLATION TIME: 2 hours
CONCRETE REQUIRED: 9.42 cubic feet
NOTE: Concrete must have a minimum rating of 2,500 psi and must be mixed per
manufacturer's recommendations.

PRE-INSTALLATION CHECK:

Compare all items received to the packing list. Notify your local sales representative immediately if any
parts are missing or damaged.
Before beginning installation, make sure that you have read and understand the Installation Introduction
manual that was supplied to you. If you did not receive a copy, or if you have a question regarding
anything covered in this manual, contact your local sales representative.
MODEL NUMBER: 80650600XX
DATE: 08/05/2011
CAMEL BACK CLIMBER
80650600XX
We are not responsible for items discovered missing
after 72 hours from time of delivery!
INSTALLATION GUIDELINES
Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Park Central Playgrounds Camel Back 80650600 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Southern Recreation Park Central Playgrounds Camel Back 80650600 Series

  • Page 1 INSTALLATION GUIDELINES CAMEL BACK CLIMBER 80650600XX USER GROUP: 5 - 12 RECOMMENDED CREW: 2 people TOOLS REQUIRED: T-45 TORX tool (supplied by manufacturer) Level 3/8” allen head tool Tape measure Auger / Post hole digger / Shovel 21/64 drill bit High speed 3/8”...
  • Page 2 INSTALLATION GUIDELINES STEP 1 Refer to PLAN VIEW and FOOTING LAYOUT to locate position of camel back climber. STEP 2 Excavate footings as shown in FOOTING LAYOUT and FOOTING DETAIL. Place a 2” spacer in each hole. STEP 3 Select one end post for camel back climber, one camel back top hump and two 3/8”x1-1/4” TORX bolts. Slide the two pieces fully together, keeping rungs oriented the same way.
  • Page 3 INSTALLATION GUIDELINES STEP 4 Select camel back bottom hump, two in-ground legs and two 3/8”x1-1/4” TORX bolts. Slide leg over stub of bottom of hump as far as it will go. Drill a 21/64” hole through the pre-drilled hole in the leg and into the bottom hump.
  • Page 4 INSTALLATION GUIDELINES Surfacing Grade ELEVATION VIEW MODEL NUMBER: 80650600XX Page 4 DATE: 08/05/2011...
  • Page 5 INSTALLATION GUIDELINES FOOTING LAYOUT FOOTING ELEVATION MODEL NUMBER: 80650600XX Page 5 DATE: 08/05/2011...

Table of Contents