Jones H-Bar Pack Manual

H-Bar Pack Manual
Thanks for purchasing a Jones H-Bar Pack! We've designed this pack to be simple, lightweight, and
durable. Please read this manual to make sure you get the pack set up correctly for your own safety
and enjoyment.
Warning: Riding a bicycle can be dangerous. All components, including accessories should be installed and
serviced by a professional mechanic to ensure your safety. Do not modify your bicycle or accessories and make
sure to read all warnings and instructions for the various components of your bicycle.

Compatibility

Your H-Bar Pack is designed to be used with the Jones Loop and Jones Cut H-Bars, and is not compatible
with the Bend H-Bar.
This H-Bar pack is made from durable, lightweight, waterproof material, and should not be used to store sharp,
heavy objects. It works best for storing lightweight, soft items like gloves or a windbreaker as well as a phone
or other small items that you would like to have handy.
Warning: Maximum weight limit for the H-Bar pack is 3 lb. Overloading the pack can disrupt the handling of the
bicycle and may lead to product failure, which can result in an accident and injury.

Installation

The H-Bar pack comes with four (4) straps installed in the four widest positions on the bag, as shown below.
The longest two straps (at the rear of the pack) should be secured around the rear crossbar of the H-Bar (the
part with the largest tubing), and the two shorter straps at the front should be secured around the front loop.
The H-Bar pack also comes with four (4) extra straps that can be used in addition to the four main straps for
extra stability, but which are not necessary in most cases.