X-Stand MAX XL Assembly And Safe Use Manual

Hide thumbs

page of 20

/ 20
Bookmarks

Quick Links

Download this manual

MAX XL

This X-Stand™ product(s) has been tested to rigid industry standards. Safe operation and use of

this X-Stand™ product(s) is the responsibility of the user(s). Please read and follow all safe use

instructions and warnings. Failure to follow these may result in serious injury or death!

First Edition, February 2019, Published by X-Stand™ TREESTANDS, Lakeville, Minnesota.

Need help?

Do you have a question about the MAX XL and is the answer not in the manual?

Questions and answers

Summary of Contents for X-Stand MAX XL

Page 1 This X-Stand™ product(s) has been tested to rigid industry standards. Safe operation and use of this X-Stand™ product(s) is the responsibility of the user(s). Please read and follow all safe use instructions and warnings. Failure to follow these may result in serious injury or death! First Edition, February 2019, Published by X-Stand™...
Page 2 Several X-Stand™ Treestands are equipped with a footrest, armrests and/ treestand. Please view it in its entirety prior to using this or any other X-Stand™ product(s). or shooting rail. Neither the footrest, armrests nor the shooting rail have been designed to Failure to follow these instructions may result in serious injury or death! support the users weight.
Page 3 Do not attempt to use this or any other X-Stand™ product(s) when WARNING! Check the ground under ladderstands and climbing systems to make sure it is firm and level.
Page 4 WARNING! You must use the X-Stand™ Treestand full-body fall arrest harness provided with this product or a harness that complies with ASTM standards. NOTE: You must store your full-body fall arrest harness out of direct sunlight and out of any other harsh environmental condition(s) that may adversely affect its performance. Failure to follow these instruc- tions may result in serious injury or death! STEP 1.
Page 5 (see Fig. 5) Then, carefully wrap the tree belt around the tree at a height your legs. The X-Stand™ Treestands full-body fall arrest harness should look like the one that allows just enough slack for you to sit comfortably in your stand. Keeping the tether depicted in Figure 5 when done correctly.
Page 6 Should you have any questions about the assembly, installation or use of this X-Stand product, or any other X-Stand products, please do not hesitate to call one of our customer service representatives at 540-877-2769 and they will answer all questions you may have about any of the complete line of X-Stand products.
Page 7 ATTENTION!! WHEN YOU SEE A “ WARNING!” BE SURE TO HEED THE MESSAGE! THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!! MAX XL · PARTS LIST Part # Description Part # Description XP19- 0233 XP19-0004 Top Ladder Section...
Page 8 MAX XL · HARDWARE DIAGRAM NOTE: Part illustrations are for reference purposes only, and may not be to actual size. {A} 1/4" x 1 1/2" Hex Bolt {C} 1/4" x 2 1/4" Hex Bolt {B} 1/4" x 1 3/4" Hex Bolt...
Page 9 NOTE: Steps 1-11 require you temporarily finger ASSEMBLY INSTRUCTIONS tighten nuts to insure proper alignment. - MAX XL - FIGURE 1 STEP 1. Insert (2) safety sleeves and the top Top Ladder Extension ladder extensions onto top ladder section and secure using (2) 1/4" x 1 3/4" hex bolts...
Page 10 FIGURE 3 Armrest STEP 6. Insert seat [D] [E] support bar into the Seat bottom of the seat Support Seat Support assembly aligning Side the top holes of seat Seat Assembly Support Side assembly with seat Gusset Frame support bar. Secure using (2) 1/4"...
Page 11 STEP 9. Rotate the seat support down aligning the lower holes with seat assembly. Secure the front holes of armrests, seat assembly, side frames and seat supports using (2) 1/4"x 3 1/4" hex bolts (E), (4) nylon washers, and (2) 1/4" nylock nuts. Note: When attach correctly the tab should be inside.
Page 12 ADJUSTABLE SUPPORT BAR ASSEMBLY - MAX XL - STEP 1. Assemble adjustable support bar by sliding support bar tree piece into support bar ladder piece, secure them using (1) 1/4"x 1 1/2" hex bolts (A) and the 1/4" wing nut.
Page 13 STEP 1. Select a straight, healthy tree, one devoid of dead branches or loose bark. attempt to install this peoduct on a tree that is not healthy! DO NOT FIGURE 1 FIGURE 2 Top Ladder Section Safety Sleeve Safety Sleeve Middle Ladder Top Ladder Section Middle Ladder Section Bottom Ladder Section Section...
Page 14 STEP 4. Place the ladderstand flat on the ground in front of the tree with the bottom ladder section approxlmately 3 feet away from the base of the trunk. Then with at least 3 adults, gently raise the ladderstand to a vertical position allowing the bark biters to come into direct contact with the tree.
Page 15 FIGURE 5 STEP 6. When the ladderstand is level and adjustable support bar is secure, unlock the cam buckle straps. Criss-cross cam buckle straps behind the tree trunk pulling them snug. Then feed the free ends of the long strap through the cam buckles and Ratchet Strap tighten the cam buckle straps securely Adjustable...
Page 16 ladder sections are firmly connected with the proper WARNING! Prior to climbing, make sure that all the hardware in place. Make sure none of the sections have become separated. If they are, do not climb the ladder. With the help of two other adults, lower the stand back down to the ground and reattach the ladder described.
Page 17 WARNING! Before attempting to climb the ladderstand bounce on the bottom ladder section to set the ladder into the ground before proceeding higher. Failure to follow these instructions may result in serious injury or death! WARNING! Always lean forward while climbing. your full-body fall arrest harness tree belt to the tree trunk prior to securing the platform to the tree and stepping on to the platform.
Page 18 Failure to follow these instructions may result in serious injury or death! instructions may result in serious injury or death! To activate your product’s warranty, please mail in your registration card or submit it online at www. X-Stand.com Product Purchased...
Page 19: Standard Limited Warranty
Limitations: This warranty is void if the product is damaged by improper or abnormal use or by accident; if the product is altered or modiﬁed in any way other than those directed by ofﬁcial X-Stand™ Trees- tands instructions; or if any attempt is made to repair the product without authorization from X-Stand™...
Page 20 21673 Cedar Avenue South Ⅰ Lakeville, MN 55044 Ⅰ 540-877-2769 • Fax: 952-236-6458 This X-Stand™ product(s) has been tested to rigid industry standards. Safe operation and use of this X-Stand™ product(s) is the responsibility of the user(s). Please read and follow all safe use instructions and warnings. Failure to follow these may result in serious injury or death! First Edition, February 2019, Published by X-Stand™...

This manual is also suitable for:

Xsls569