Download Print this page

Kilner Fridge Dispenser Manual

1. When first receiving

your Kilner

Fridge

Dispenser, the spigot/

tap will be loose for safe

transit. This must be

tightened before use.

2. Wash with warm soapy water before use. After filling the dispenser with liquid,

the lid needs to be securely fastened carefully to ensure there are no leaks or drips.

3. Tighten the spigot

carefully ensuring it is

positioned 90 degrees to

the Kilner

logo.

4. Hand tightening

is adequate. Over-

tightening will cause the

silicone washer to buckle

and distort. This will

cause the spigot/tap

to drip.

Table of Contents

Need help?

Do you have a question about the Fridge Dispenser and is the answer not in the manual?

Page 1 1. When first receiving your Kilner Fridge ® Dispenser, the spigot/ tap will be loose for safe transit. This must be tightened before use. 2. Wash with warm soapy water before use. After filling the dispenser with liquid, the lid needs to be securely fastened carefully to ensure there are no leaks or drips.
Page 2 5. Make sure the silicone ring on the underside of the lid is flat and not distorted. Over-tightening the washer on the spigot/ tap can cause the silicone ring to distort. 6. Carefully place the lid on the mouth of the dispenser by holding the seal towards the lid.