EARTO iPad Mini 5 Keyboard Case User Manual page 4

Light Indica�on
Power indicator
Bluetooth indicator
Caps lock indicator
Charging indicator
Troubleshoo�ng
If the keyboard fails to work, please check if:
1. The battery is too low. Fully charge the keyboard (no less than 2 hours) for the first time to
extend battery life.
2. The keyboard is located within 33 feet from your iPad.
3. The Bluetooth function on the iPad is enabled.
I can't get my Bluetooth connected:
Step 1: Switch ON/OFF to ON.
Step 2: Press "fn + C" ( Note: Paring indicator light will begin blinking)
Step 3: Toggle Bluetooth On in the Settings app on your iPad.
Step 4: Tap " iPad Keyboard " under "MY DEVICES" in the Settings.
For the coming use, you just need to open the keyboard and tablet power, press any
key on the keyboard.Then it will automatically connect.
( No need to click "fn + C" and pair it. Otherwise, it will show not connected.)
Can pair before but failed to pair this time:
Step 1: Delete all the Bluetooth devices on the iPad. (include our keyboard)
Step 2: Switch off the Bluetooth function and reboot the iPad.
Step 3: Switch the keyboard off and on.
Step 4: Reconnect the keyboard. (Repeat the above "Pairing Steps" )
(support@earto.net)
Cau�on
If you have problems with keyboard usage or improvement suggestions, please do not hesitate to
contact us by email. We will help you solve the problem. Thank you!!
Three indicator lights will flash 3 seconds
Press "fn + C" keys to enter pairing mode.
White light is on.
Stably on in red color.
Fully Charged - turns green.
Low battery indicator - Flash in red color to remind you to charge it.
4