Ryobi OWS1815 Instructions Manual page 11

GETTING STARTED
3
1
2
Install either the flat fan nozzle or cone spray nozzle and
tighten.
9
1
2
Insert the harness buckle to the harness latch. Pull both
ends of the harness to tighten.
4
1
2
Untighten the tank lid and remove it from the tank.
10
1
2
Turn on the product.To start the flow of liquid at the spray
wand, squeeze the trigger.
GETTING STARTED
5
1
2
Fill the tank with the desired amount of liquid (up to 15L).
The cone spray nozzle adjusts the flow of liquid from a
stream to a cone spray.
6
2
1
Place the tank lid back onto the tank and tighten.
The flat nozzle provides a fan spray.
9