Subscribe to Our Youtube Channel
Summary of Contents for Dormakaba System 6000
- Page 1 RFID Encoder System 6000 Installation Instructions PK3695 - 2019 - 03...
- Page 2 The following ports must be open in the firewall: TCP Port 28000 (Server Inbound) TCP Port 9090 (Server Inbound) © 2018 dormakaba USA, Inc. All trademarks and registered trademarks are the property of their respective owners. dormakaba RFID Encoder PK3695...
- Page 3 System 6000 Encoder Setup 1- Connect the USB cable to the computer and to the encoder. 2 - Open the CRS program and log in. Choose the “Add” option under Settings. 3 - Choose the “Kaba RFID” option under Network Encoder Type and press “Configure Kaba RFID”.
- Page 4 System 6000 Encoder Setup 4 - Press the drop-down menu and select the encoder you would like to configure. (The encoders MAC address should appear). Enter in a Station ID. Choose either the TCP/IP configuration or the USB configuration. Select “Obtain an IP address automatically” for DHCP Configuration.
- Page 5 1 - Log into Client, choose the System tab, and choose the Terminal Settings option. Set the Encoder Station to the new Encoder Station ID. 2 - Attempt a key interrogation to test the encoder connection. dormakaba RFID Encoder PK3695 03-19...
- Page 6 • Ensure you are using the correct cable (USB or Ethernet) • Confirm that the minimum prerequisite software (System 6000 5.6.8.0) and firmware (Encoder V.1.012) is installed • Remove the power from the encoder, wait five seconds and power it back up (Repeat as necessary) •...
- Page 7 USA Inc. Customer Services & Support Saflok: 1.800.999.6213 / + 1.248.837.3700 General Information: dormakaba.us Online Consumable Orders: www.saflokstore.com To access all of our easy steps, please visit our Support Website: www.kabalodgingsupport.com www.dormakaba.com...
Need help?
Do you have a question about the System 6000 and is the answer not in the manual?
Questions and answers