Changing The Password; Set Id Setup - LG 32LN549C Owner's Manual

Changing the Password

If security for the system is a critical issue, the
password can be changed.
1
Use the v or ^ button to select the Password
Change option and then press the OK button.
If the password is incorrect, the TV will
y y
return to the installation menu (This feature
is not available for all models).
2
Key in a new four number password, key in the
password again for confirmation.
The password cannot be "8-7-4-1". That
y y
sequence of numbers is used to enter the
calibration menu (This feature is not available
for all models).
Password Change
New Password
Confirm Password
ꕣ
Previous

Set ID Setup

1
Use the v or ^ button to select the Set ID
Setup option and then press the OK button.
2
Select Yes to enable Set ID Lock or No to
disable Set ID Lock.
3
Key in a set ID number 1 ~ 99.
Set ID Setup
Set ID Lock
Set ID
ꕣ
Previous
Configuration setup
1
Select RCU (Remote Control Unit)
It is a mode to set whether to use Select
y y
RCU or not. When 'Select RCU' is set to
'Enable', You can adjust the 'Number of
RCU' menu.
2
Number of RCU
It is a mode to set the Number of RCU.
y y
Number of RCU value range 1 ~ 9 (When
'Select RCU' is set to 'Enable')
Number of RCU value range 0 (When 'Select
RCU' is set to 'Disable')
* * * *
* * * *
OK
◀ ▶
Yes
1
OK
* RCU (Remote Control Unit): It is special RCU
that operates only a set number of RCU in the
TV.
3
Splash Offset Time
Sets the splash image display time.
y y
The time can be set to between 0 and 10
y y
seconds.
4
USB Auto playback
When 'USB Auto Playback' is 'Enable', TV
y y
finds and plays USB's movie files located
at the first slot and partition and root(top)
directory movies if USB is pluggedin. (Some
menu OSDs may prevent this function.)
When the TV is on, the TV will search
y y
the USB's movie files and play them,
automatically.
If it reaches the last file, it starts the first file
y y
again.
5
Auto Sensing (For LP360H Only)
Select 'Aux Source Setting – Yes' to use
y y
'Auto Sensing' function (See page 7). If 'Auto
Sensing' is set to 'To Set ⊙', the input is
automatically switched when the input signal
that you set to 'ON' is received .
If 'Auto Sensing' is set to 'Disable', the input
y y
is not switched when the input signal is
received .
TV can display the switched input depends
y y
on connected device's display availability.
SIMPLINK and Auto Sensing cannot work
y y
simultaneously. If SIMPLINK is set to On,
Auto Sensing is automatically set to Disable.
If the signal is removed while Auto Sensing
y y
(automatic input switch) is enabled, the input
returns to the previous setting .
If the several inputs are connected by
y y
enabling Auto Sensing and the automatic
input switch is performed several times, the
input returns to the previous setting only
for the last input and does not repeat the
operation for the rest.
Configuration Setup
Select RCU
Number of RCU
Splash Offset Time
USB Auto Playback
Auto Sensing
ꕣ
Previous
11
INSTALLATION MENU
Enable
1
0
Disable
Disable
OK