Kubota AP-SSG2524 Operator's Manual
  1. Manuals
  2. Brands
  3. Kubota Manuals
  4. Grinder
  5. AP-SSG2524
  6. Operator's manual

Kubota AP-SSG2524 Operator's Manual

Stump grinder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Stump Grinder
AP-SSG2524
37891
xxxxx
Table of Contents
!
Read the Operator's Manual entirely. When you see this symbol,
the subsequent instructions and warnings are serious - follow
without exception. Your life and the lives of others depend on it!
Cover photo may show optional equipment not supplied
with standard unit.
For an Operator's Manual and Decal Kit in French
Language, please see your Kubota dealer.
328-215MK
Operator's Manual
Printed 11/13/19

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AP-SSG2524 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Kubota AP-SSG2524

Summary of Contents for Kubota AP-SSG2524

  • Page 1 Your life and the lives of others depend on it! Cover photo may show optional equipment not supplied with standard unit. For an Operator’s Manual and Decal Kit in French Language, please see your Kubota dealer. Printed 11/13/19...

  • Page 2: Machine Identification

    Model Number Serial Number Machine Height Machine Length Machine Width Machine Weight Delivery Date First Operation Accessories Dealer Contact Information Name: Street: City/State: Telephone: Email: California Proposition 65 WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov AP-SSG2524 Stump Grinder 328-215MK 11/13/19...
  • Page 3 Copyright 2019 All rights Reserved Kubota provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Kubota assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Kubota reserves the right to revise and improve its products as it sees fit.
  • Page 4 Parts Manual for this equipment. for Kubota products. Refer to Download the appropriate App on your Parts Manual QR Locator on smart phone, open the App, point your this page for detailed phone on the QR code and take a picture.

  • Page 5: Important Safety Information

     Important Safety Information Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Safety at All Times Look for the Safety Alert Symbol Careful operation is your best The SAFETY ALERT SYMBOL indicates there is a assurance against an accident.

  • Page 6: Transport Safely

     Lower attachment to the ground and  Replace parts on this attachment above recommended pressures follow all shutdown procedures with genuine Kubota parts only. Do shown in the Operator’s Manual. before leaving the operator’s seat to not alter this attachment in a way ...
  • Page 7 Use Seat Belt and ROPS Keep Riders Off Lights and Devices Machinery  Kubota recommends the use of a CAB or roll-over-protective-  Slow moving tractors, skid steers,  Never carry riders on skid steer structures (ROPS) and seat belt and self-propelled machines can or attachment.
  • Page 8 Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Avoid crystalline Silica  Be aware of and follow OSHA  If possible, change into disposable (or other local, State, or Federal) or washable work clothes at the (quartz) Dust guidelines for exposure to airborne...
  • Page 9 Important Safety Information This page left blank intentionally. 11/13/19...

  • Page 10: Safety Labels

    Peel backing from label and press label firmly onto the all damaged or missing labels. Order new labels from your surface. nearest Kubota dealer. To find your nearest dealer, visit our dealer locator at www.landpride.com. d. Squeeze out air bubbles with edge of a credit card or with a similar type of straight edge.
  • Page 11 Table of Contents Important Safety Information 37891 838-107C Danger! Thrown Object Hazard (3-places) 35329 818-798C Danger! Pinch Point Hazard (2-places) 35329 848-088C Danger! Guard Missing 35330 11/13/19 AP-SSG2524 Stump Grinder 328-215MK...
  • Page 12 Table of Contents Important Safety Information 838-293C Warning! Read Operator’s Manual 37891 838-295C 37891 Danger! Rotating Blade Hazard AP-SSG2524 Stump Grinder 328-215MK 11/13/19...

  • Page 13: Using This Manual

    To order a new Operator’s or Parts Manual, contact your authorized dealer. Manuals can also be Further Assistance downloaded, free-of-charge, from our website at Your Kubota dealer wants you to be satisfied with your www.landpride.com new attachment. If for any reason you do not understand Terminology...

  • Page 14: Skid Steer Requirements

    & cotter pins are spread. Manual Make sure all grease fittings are in place Page 33 and lubricated. Make sure all safety labels are correctly Page 6 located and legible. Replace if damaged. AP-SSG2524 Stump Grinder 328-215MK 11/13/19...

  • Page 15: Hydraulic Hose Hook-Up

    Bottom slots 35331 Hooking-up to the Stump Grinder NOTE: If attaching to a Kubota skid steer, route Figure 1-1 hydraulic hoses through Kubota’s SVL or SSV Hose Stay as shown in Figure 1-2. Purchase SVL Hose...
  • Page 16 Hydraulic Motor (#9) • If attaching optional toggle switch control harness Case Drain Line (#12) for Kubota CTL, see “Control Harness With 2 Connects To Eyelets” on page 25 Hydraulic Motor (#9) 5. While sitting in the skid steer seat with seat belt fastened, start skid steer, turn auxiliary hydraulics “on”...

  • Page 17: Check Equipment Clearances

    4. Start skid steer and raise loader arms high enough to tilt the hitch plate fully down without Stump Grinder making contact with the ground. 5. Fully extend tilt cylinder on the Stump Grinder. 6. Fully extend hydraulic cylinders on end of loader arms. 11/13/19 AP-SSG2524 Stump Grinder 328-215MK...

  • Page 18: Section 2: Adjustments

    3. Reinsert 1/2"-13 x 1 1/2" GR5 cap screws (#3) and secure with hex flange locknuts (#4). 4. Tighten hex flange locknuts (#4) to the correct torque. 5. Repeat steps 1 to 4 for the right-hand side. Skid Shoe Adjustment Figure 2-1 AP-SSG2524 Stump Grinder 328-215MK 11/13/19...

  • Page 19: Operating Checklist

    For contact information, see Dig Safe in the hoses, are not torn, and are not worn thin. Replace “Important Safety Information” starting on page 1. hose sleeve if worn thin, torn, or not properly secured to hydraulic hoses. 11/13/19 AP-SSG2524 Stump Grinder 328-215MK...

  • Page 20: Transport Safety

    Always comply with all federal, state, and local laws. AP-SSG2524 Stump Grinder 328-215MK 11/13/19...
  • Page 21 See “Skid Shoe approximately 8" below ground as shown in Adjustment” on page 14 for detailed adjustment Figure 3-5 on page 18. instructions. If available, set skid steer park brake. 11/13/19 AP-SSG2524 Stump Grinder 328-215MK...
  • Page 22 End of 1st Layer Approx. 4" Deep Across Top of Stump Figure 3-4 37896 Top Angle Bars Bottom slots 35331 Unhooking From the Stump Grinder End of a Series of Layered Cuts Approx. 8" Below Ground Figure 3-6 Figure 3-5 AP-SSG2524 Stump Grinder 328-215MK 11/13/19...
  • Page 23 It until the cutting wheel is just above the stump. It is time to won’t take you long to learn how to use your new Kubota raise the engine rpm to full operating speed, extend the...
  • Page 24 Section 4: Options Electrical Control Harness (Optional) Kubota offers two electrical control harness. If not purchased with the grinder, one may be purchased from your nearest Kubota dealer. Additional instructions are provided on the page noted in the list below.
  • Page 25 37389 • 10 amp Fuse (#8): Fuse (#8) is supplied by customer. Kubota Power Connection (Located Behind Drive Seat) Install 10 amp fuse (#8) in Kubota’s fuse box slot #17 Figure 4-3 labeled “Electrical Outlet-2”. Refer to Figure 4-2: •...

  • Page 26: Connect To Power

    Connect to Power 37390 Refer to Figure 4-2 on page 21 & Figure 4-6: 4. Plug opposite end of power cord (#1) to Kubota’s 2-pin Deutsch plug “A” located behind driver’s seat. 5. Make sure power cord (#1) is placed in an out-of-the-way area to prevent operator entanglement with the cord.
  • Page 27 Refer to Figure 4-2 on page 21 & Figure 4-9: If not already connected, connect attachment hydraulic hoses to the quick release couplings on the loader arm. Refer to “Hydraulic Hose Hook-up” in the attachment Operator’s Manual for detailed instructions. 11/13/19 AP-SSG2524 Stump Grinder 328-215MK...
  • Page 28 Table of Contents Section 4: Options This page left blank intentionally. AP-SSG2524 Stump Grinder 328-215MK 11/13/19...
  • Page 29 This harness is used with skid steers not equipped with a Please contact your local Kubota dealer for any missing Deutsch HD30 14 pin or 2 pin coupler. It consist of the hardware.
  • Page 30 (#5). Make certain harness is not slack and will not catch on objects as loader arm is raised and lowered. 35230 Attach Cable to Hydraulic Coupling Lines Figure 4-12 AP-SSG2524 Stump Grinder 328-215MK 11/13/19...
  • Page 31 Terminate male end of wire harness (#1) in the Thread Wiring Harness (#2) & Power Cord (#3) Through Cab engine room. Figure 4-17 NOTE: Wire harness (#2) will be routed to the same location and connected to wire harness (#1) later. 11/13/19 AP-SSG2524 Stump Grinder 328-215MK...
  • Page 32 6. Add any other required cable ties (#5) to contain wire harness (#2) in the engine room. No additional ties Thread Wiring Harness (#2) Along Firewall were required in this situation as the weaving through Figure 4-19 the hoses contained the harness. AP-SSG2524 Stump Grinder 328-215MK 11/13/19...
  • Page 33 Add Cable Tie (#5) After Wire Harness (#2) & Power Cord (#3) Are Properly Routed To Their Respective Termination Points. 35235 Route Power Cord (#3) & Tie Harness (#2) Beneath Cab Figure 4-21 35239 Mount Control Box Figure 4-24 11/13/19 AP-SSG2524 Stump Grinder 328-215MK...
  • Page 34 Solenoid For Rotate (Left/Right) Cylinder 35359 35961 Attach Brown/White Connectors To This Solenoid CTL/SS Coupler Figure 4-27 Solenoid For Tilt (Up/Down) Cylinder Attach Green/Red Connectors To This Solenoid 35242 Attach Solenoid Wires to Equipment Figure 4-26 AP-SSG2524 Stump Grinder 328-215MK 11/13/19...
  • Page 35 Replace illegible or missing safety labels by obtaining of the Stump Grinder while facing the skid steer. new labels from your Kubota dealer. IMPORTANT: Make certain the teeth are mounted DANGER with carbide cutting tip leading in rotation.

  • Page 36: Long Term Storage

    Straight Teeth (#4) Attached on 3. Repaint parts where paint is worn or scratched to Alternating Sides at the Outer Bolt prevent rust. Ask your Kubota dealer for touch-up Circle Diameter paint. Paint is available in aerosol can, quarts, and RH Teeth (#2) on Far gallon sizes.

  • Page 37: Lubrication Points

    Type of Lubrication: Multi-purpose Grease Quantity = As required (make sure grease is visible) 35336 Tilt Pivot Point 1- Zerk Type of Lubrication: Multi-purpose Grease Quantity = As required (make sure grease is visible) 35336 11/13/19 AP-SSG2524 Stump Grinder 328-215MK...

  • Page 38: Section 6: Specifications & Capacities

    Outside Cutting Wheel Diameter in (cm) 23 3/4 (60.3) Cutting Wheel Thickness in (mm) 1/2 (13) Maximum Pressure Rating psi (mPa) 3500 (24.1) 54 1/4" (1.38 m) 67 3/4" (1.72 m) 30" (76.2 cm) 35338 AP-SSG2524 Stump Grinder 328-215MK 11/13/19...

  • Page 39: Section 7: Features & Benefits

    Makes it easier to pull the cutting wheel off of the motor spindle. wheel puller access holes Attached rain tight manual holding Keeps manual with stump grinder for quick easy access. Manual won’t get wet. tube Offset articulating arm Allow for optimum line-of-site from operator’s seat. 11/13/19 AP-SSG2524 Stump Grinder 328-215MK...

  • Page 40: Section 8: Troubleshooting

    Wiring harness connections are loose. Reconnect all wire harness connections. Articulation & tilt cylinders do Wires in wiring harness are broken or Replace or repair broken or damaged wiring not operate chewed through by rodents. harness. AP-SSG2524 Stump Grinder 328-215MK 11/13/19...

  • Page 41: Section 9: Torque Values Chart

    1-1/2" - 12 1330 2970 2190 4820 3560 Torque tolerance + 0%, -15% of torquing values. Unless otherwise specified use torque values listed above. Additional Torque Values Tooth Mounting Bolts 5/8"-13 UNF GR 8 200 ft-lbs 11/13/19 AP-SSG2524 Stump Grinder 328-215MK...
  • Page 42 Registration is done by your dealer. IMPORTANT: The Online Warranty Registration should be completed by the dealer at the time of purchase. This information is necessary to provide you with quality customer service. Model Number ____________________ Serial Number ____________________ AP-SSG2524 Stump Grinder 328-215MK 11/13/19...
  • Page 43 Kubota used reasonable efforts to set forth and include accurate and up to date information in this publication. Kubota disclaims all representations and warranties, whether express or implied, including, but not limited to, warranties of merchantability...
  • Page 44 31700 W. 207th ST., Edgerton, KS 66021 Telephone: (913) 215-5915 Central Division: 14855 FAA Blvd., Fort Worth, TX 76155 Telephone: (817) 571-0900 Northern Division: 6300 at One Kubota Way, Groveport, OH 43125 Telephone: (614) 835-1100 Southeast Division: 1025 Northbrook Parkway, Suwanee, GA 30024 Telephone: (770) 995-8855...

Table of Contents

Save PDF