Page 2
5. Do not remove the dust cap until the connector has been completely assembled. 6. A proper amount of index matching gel is applied in the connector. Do not insert fiber more than once. Assembling Tools: 1. Cleaver 2. Scissors 3. Gauze with Alcohol 4. Stripper www.lanpro.com...
Page 3
2 SC Connector Flat type - 123 Manual ® Assembling Procedure: 1.- Check Connector parts 2.- Insert boot to cable 3.- Gauze with Alcohol 4.- Strip out UV coating after 2cm 5.- Cut the fiber with cleaver 6.- Check the length of fiber www.lanpro.com...
Page 4
8.- Make sure fiber bending 9.- Remove cover jig 10.- Press the button (yellow cover) 11.- Lock the boot 12.- Completion to assemble. LanPro is continuously improving its products and reserves the right to change specifications and availability without prior notice. www.lanpro.com...