1. Manuals
  2. Brands
  3. fluidra Manuals
  4. Swimming Pool Vacuum
  5. Astral Pool S5
  6. Installation manual

fluidra Astral Pool S5 Installation Manual

Suction side pool cleaner
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
S5™
SUCTION SIDE POOL CLEANER
INSTALLATION GUIDE
Rainbow Pool Products
®
PO Box 2388, Mansfield Qld 4122
Telephone STD 61-7-3849 5385
Facsimile STD 61-7-3849 5384
Email: info@rainbowpoolproducts.com.au
Web: www.rainbowpoolproducts.com.au
IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SAVE THESE INSTRUCTIONS

Advertisement

Table of Contents
loading

Related Manuals for fluidra Astral Pool S5

Summary of Contents for fluidra Astral Pool S5

  • Page 1 S5™ SUCTION SIDE POOL CLEANER INSTALLATION GUIDE Rainbow Pool Products ® PO Box 2388, Mansfield Qld 4122 Telephone STD 61-7-3849 5385 Facsimile STD 61-7-3849 5384 Email: info@rainbowpoolproducts.com.au Web: www.rainbowpoolproducts.com.au IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SAVE THESE INSTRUCTIONS...
  • Page 2 E-mail : info@astralpool.com.au Trademarks and disclaimers: All AstralPool trademarks and logos are owned by Fluidra S.A. S5™ and AstralPool® are trademarks DANGER on the part of the manufacturer. INSTALLERS, OPERATORS AND OWNERS MUST READ THESE WARNINGS AND ALL INSTRUCTIONS IN THE OWNER’S MANUAL BEFORE USING THIS CLEANER.
  • Page 3 any of these structures or components of the customer’s pool. Before installing the cleaner in a vinyl liner pool: pool professional make all the necessary repairs. Also, if there are stones, roots, etc., under the liner, remove them before installing the cleaner.

  • Page 4: Pool Preparation

    POOL PREPARATION 1. Chemically balance the pool water. 3. Hand vacuum thoroughly. Cleaner Components Remove the cleaner and all parts from the box. Check to be sure all components are included. 1. S5 cleaner body Figure 1 3. Elbow 4. Regulator valve 5.

  • Page 5: Assembling The Cleaner

    ASSEMBLING THE CLEANER Figure 3 piece, making cleaner assembly a simple and quick process. Leader Hose Assembly Hose original parts and hoses. Swivel Assembly water, then twist and push the female ends onto the male ends. Figure 2 2. Connect the leader hose to the cleaner swivel. See Figure 3.

  • Page 6: Installing The Cleaner

    INSTALLING THE CLEANER Figure 6 a wide variety of swimming pools. Both the standard in- Note: valve cap for the regulator valve may not be needed. line from the skimmer to which the cleaner will be connected. Insert the vacuum plate. Insert the threaded cuff...
  • Page 7 Note: 3. Turn the pump on. 4. Turn the regulator valve adjustment knob clockwise to increase flow or Figure 11. Figure 11 7. Turn the pool pump on. calculate the cleaner speed and adjust RPM as needed. 1. While the cleaner is running, bring the cleaner up to just beneath the pool’s water surface. Note: into the pool system.

  • Page 8: Maintenance

    Return Line Water Flow IMPORTANT performance. It may cause the cleaner to steer away from the end of the pool where the return line is located, or it may best in your pool: vacuuming up debris in its path. MAINTENANCE Figure 15 Top Cover •...

  • Page 9: Tire Replacement

    Figure 17 cover. 6. Replace the turbine cover with the swivel assembly oriented towards the front of the cleaner. See Figure 16. 7. Visually inspect the rest of the cleaner and remove any debris 8. Repeat step 2 (turning the right wheel) to insure that the cleaner runs smoothly.
  • Page 10 TROUBLESHOOTING PROBLEM CORRECTIVE ACTION Cleaner is not moving or is moving too slowly. Check for debris inside the cleaner itself. Check to be sure the pump has primed. Check for leaks in the system that may prevent proper priming. backwashing. pump impeller).

Table of Contents