Summary of Contents for Paddle Palace S4W PRO ROBOT
Page 1
S4W PRO ROBOT User Manual paddlepalace.com 800-547-5891 503-777-2266...
Page 2
S4W Pro Taking Robot Technology to the Next Level The Paddle Palace S4W Pro takes robot technology to the next level. This innovative robot has two heads, each with two throw wheels. Both heads, and the four throw wheels, are all independently programmable, allowing you great flexibility in designing playing patterns and practice options.
3 Paddle Palace S4W Robot User Manual Table of Contents Robot Components / Features How to Assemble the Ball Catch Net The Power Supply Control Box Features Setting the Total Number of Balls Setting the Frequency Setting the Head Angle (Loop)
Robot Components / Features This manual has been written to help you enjoy and get the most out of your new Paddle Palace Robot. Take time to read these pages thoroughly and keep it handy for reference when using your robot.
5 Paddle Palace S4W Robot User Manual Net Hardware: How to assemble the Ball Catch Net A 2 Net Supports that clamp on either side of table B Control Box Support 1. Unlock the buckle that holds the two halves of the Ball Catch Net together.
6 Paddle Palace S4W Robot User Manual S4W Control Box Various Serving Shooting Head 2 Adjustment Total Number Sequence Keys (Increase/Decrease) of Balls Selection Increase/ Menu Decrease Shooting Head 1 Adjustment Keys Top-Wheel Speed (Increase/Decrease) Shooting Head 2 Top-Wheel Speed...
7 Paddle Palace S4W Robot User Manual Setting the Head Angle (Loop) Head Angle Lock Loosen the Head Angle Lock knob with one hand while Loop adjusting the head angle using the Loop Adjustment Knob. Adjustment Tighten the Head Angle Lock knob to hold head at desired Knob angle.
8 Paddle Palace S4W Robot User Manual Setting Throw Wheel Speed (Amount of Speed and Spin) Wheel speed can be set in either Working or Standby mode. Top Wheels The top and bottom wheel display will blink the current settings when the robot is in Standby mode.
9 Paddle Palace S4W Robot User Manual Selecting the Landing Spot Locations (Program Your Own Sequence) FOR 1 HEAD Set Landing Spot The Landing Spot Locations Sequence is set in Standby mode. There are 11 numbered buttons on the bottom of the control box. These buttons indicate 11 locations (landing spots) on the table where the robot will deliver balls.
10 Paddle Palace S4W Robot User Manual Setting Single Head Serve 1. Set the Ball Counter of one shooting head to infinity. Press and hold the (+) button until a dash appears. 2. Set the Frequency press (+) to increase (-) to decrease.
11 Paddle Palace S4W Robot User Manual How to Maintain Your New Robot P ELECTRONICS: The robot’s electric components are located in the machine’s circuit board and the control box. Therefore, you should be careful to avoid dropping either component or avoid any activity that would cause damage to the internal electronic units of one or both of these components.
12 Paddle Palace S4W Robot User Manual General Warnings 1. Please read the instruction manual carefully before using the robot, and follow the operation instructions. 2. Children should be supervised while operating the robot. 3. Avoid windy and/or rainy days when using outdoors.
Page 13
13 Paddle Palace S4W Robot User Manual 30 Pre-Programmed Landing Sequences See pages 8-9 for setting up this feature. LEFT HEAD RIGHT HEAD LEFT HEAD RIGHT HEAD LEFT HEAD Twice at spot #10 Twice at spot #2 Twice at spot #1...
Need help?
Do you have a question about the S4W PRO ROBOT and is the answer not in the manual?
Questions and answers