Fogg Company Microb-Blaster Air Sanitizer ® ABLE OF ONTENTS INTRODUCTION Preface Parts Ordering SAFETY WARNINGS Personnel Safety Operations Safety Maintenance Safety Microb-Blaster Air Sanitizer 4800 ® OPERATIONS System Overviews Microb-Blaster Air Sanitizer 2400 ® Microb-Blaster Air Sanitizer 4800 ® UVC Lamps...
They are preceded by this exclamation diagram. The information contained or disclosed by this document is considered proprietary by Fogg Company. This document, items, and information contained or disclosed herein shall not be used, copied, or reproduced in whole or in part, nor shall the contents be revealed in any manner to any person unless written permission is obtained from Fogg Company.
Fogg Company Microb-Blaster Air Sanitizer ® Parts Ordering Please refer to the machine model number and part number when ordering parts. Our normal business hours are 8:00 a.m. to 5:00 p.m. USA Eastern Standard Time (EST), Monday through Friday. Fogg Company Telephone: 616.786.3644 (Front Desk)
Refer to all machine labels that have been placed on the machine to familiarize yourself with the potential hazards on the machine. Safety Guarding Do not operate the Fogg Microb-Blaster Air Sanitizer without all guards and covers in place. ®...
Maintenance Safety Safety Glasses Make certain UV-C light safety glasses are always worn when servicing this equipment. Anytime you are working on or around the Fogg Microb-Blaster Air Sanitizer, UV-C safety glasses MUST BE WORN! Always wear safety ® glasses when performing maintenance on this machine.
Fogg Company Microb-Blaster Air Sanitizer ® Personnel Safety (continued) Microb-Blaster ® Air Sanitizer 4800 UVC Direct Exposure Hazard Zone CAUTION: Do not get on a ladder or chair to stand on and look • down into the unit. The unit should not be placed where personnel could •...
Fogg Company Microb-Blaster Air Sanitizer ® OPERATIONS System Overviews Microb-Blaster ® Air Sanitizer 2400 UVC Lamps Power Supply, Fuse, On/Off Switch Air Filter Microb-Blaster® Air Sanitizer 2400 Overview Page 8...
Fogg Company Microb-Blaster Air Sanitizer ® System Overview (continued) Microb-Blaster ® Air Sanitizer 4800 UVC Lamps Power Supply, Fuse, On/Off Switch Air Filter Microb-Blaster ® Sanitizer 4800 Overview Page 9...
Lamp Life The lamps have a Fogg-rated life of 9000 hours of operation. 9000 hours is the point at which the actual output of UV-C light may start to drop below 90% of the original, and the risk of inadequate dosage exceeds allowable tolerances.
CLEANING Cleaning Notes The Fogg Microb-Blaster® Air Purifier is a precision machine that must be cared for and cleaned on a regular basis. The interior of the light chamber should be blown-out with clean, compressed shop air on a weekly basis to remove any accumulated dust and debris that could cause shadowing of the UV-C lamps.
Fogg Company Microb-Blaster Air Sanitizer ® MAINTENANCE Changing the Lamps Microb-Blaster Air Sanitizer 2400 ® 1. Disconnect the power and allow the unit to cool. 2. Open the top of the unit by unscrewing the four screws. 3. Remove the top cover.
Page 13
Fogg Company Microb-Blaster Air Sanitizer ® Changing the Lamps (continued) Microb-Blaster® Air Sanitizer 2400 (continued) 7. Gently connect the new lamps with the slightly rectangular connections. Note: if it doesn't connect gently, rotate 90 degrees and try again. Rectangular Lamp Plug Shape 8.
Fogg Company Microb-Blaster Air Sanitizer ® Changing the Lamps (continued) Microb-Blaster ® Air Sanitizer 4800 The top of the machine is open. This allows for easy access to the lamps, weather by laying the machine on its side to remove them, or to pull them straight up and out.
Fogg Company Microb-Blaster Air Sanitizer ® Changing the Air Filter Microb-Blaster ® Air Sanitizer 2400 and 4800 1. Lock two wheels. 2. On opposite side of big air filter opening, there are a few thin openings. Use a thin, firm object (like a ruler) to press on the filter and push it out a couple inches so that it is grabbable from the other side.
Fogg Company Microb-Blaster Air Sanitizer ® Changing the Power Supply Fuse Microb-Blaster ® Air Sanitizer 2400 and 4800 Tucked between the On/Off switch and the power cord plug-in is a fuse insert. Unplug the cord from the wall and from the machine, pry open the fuse insert from inside the power cord plug-in, and replace the fuse.
Fogg Company Microb-Blaster Air Sanitizer ® Service Parts List Item Part Number Lamps 616-10896 Ballasts 616-10910 Power Cord 616-10904 Switches 616-10819 Filters 616-10871 Filters (Set of 3) 834-9733-3 Filters (Set of 12) 834-9733-12 Casters 616-10810 Caution Sticker 834-2565 Power Supply Fuse...