Farm Shop Grain Temp Guard Setting Instructuions

WARNING: this unit needs to be connected to electrical power or contain a battery backup or all settings will be lost.
ON OFF
1. Power the unit or by hitting fourth key
2. If necessary unlock the screen by simultaneously pressing the two middle keys;
corner go from locked to open:
3. Press the MENU button
4. Press the or select Fahrenheit (F) or Celsius (C) –
5. Press the OK to confirm setting
6. A temperature will appear in the TOP portion of the viewing screen and in the lower information bar following the
, SETUP followed by HIGH. Press the
top window) temperature probe.
7. Press OK, the fourth button.
8. In the information bar at the bottom of the screen it will switch from high to low indicating that you are now setting the LOW alarm
point. Press the or button to increase or decrease the desired ALARM point.
9. Press OK, the fourth button.
10. A temperature will appear in the LOWER portion of the viewing screen and in the lower information bar following the
, SETUP followed by HIGH. Press the
plug-in / lower window) temperature probe.
11. Press OK, the fourth button.
12. In the information bar at the bottom of the screen it will switch from high to low indicating that you are now setting the LOW alarm
point. Press the or button to increase or decrease the desired ALARM point.
13. Press OK, the fourth button.
14. The information bar will read
active, after you have pressed OK. On this screen it may be turned off by pressing
OF
in the lower portion of the screen, enter OK. Do this when you want to de-activate a current alarm. You will need to re-activate
at a later time.
Alarm - Dual Temperature
. When in the off position, the internal clock may not maintain correct time.
to
or button to increase or decrease the desired ALARM point for the first (left plug-in /
or button to increase or decrease the desired ALARM point for the second (right
on
SETUP and will appear in the top portion of the screen indicating the unit is
and , you see the padlock in the lower left
or button. When switched off you will see
and
and