Page 2
Introduction Thank you for choosing Logika. Please take a moment to carefully read through the manual to ensure safe and proper installation and use. • Before use, the product must be properly installed as described in this manual by a qualified technician.
Features • Communication Mode: IEEE802.15.4 Zigbee. Can be linked to the other devices, like the Smart Automatic Manipulator and Sound • Warner. Strong anti-interference ability, low false alarm rate. • Automatic adjustment of sensitivity. • Specifications Communication Method IEEE 802.15.4 ZigBee Antenna Type PCB Antenna Power...
Installation Steps Hardware Installation Due to the way this Gas Detector works, it is recommended that you install the device on a wall (wall-mounted method). In this vertical orientation it is more efficient at detecting the movement of the airflow/gases. The Smart Gas Detector requires a mains supply to operate, so please make sure that the cables are in place at the location you wish to mount the device.
Page 6
3) Insert the wall plugs and attach the Wall-Mounted base using the supplied screws. Feed the mains cables through the hole in the base. 4) Connect the main cables to the Smart Gas Detector connection points and attach the device to the base by lining up the slots on the Smart Gas Detector to the hooks on the base.
Page 7
5) Switch on the main supply. Installation is now complete. Once the hardware installation is complete, you will need to follow the instructions in Adding the Device to the Smart Home Network along with the Logika Smart Mobile App user manual to add the device to the system.
Page 8
Adding the Device to the Smart Home Network Use the Logika Smart Home app to add the device to the Smart Home system. Please refer to the Logika Smart Mobile App user guide which will take you through the process of adding smart devices to the system.
Device Functions When the device is first powered on, it will normally automatically attempt to connect to the Zigbee Smart Home network. The System Indicator light will flash as it’s searching for the network. If it connects, the light will remain on for 2 seconds and then go out. If this does not happen, you can manually connect via the mobile app and follow the instructions below.
Safety Precautions • Disable any power prior to connecting the device to the main supply. • The device must be installed by a qualified electrician. • Do not disassemble or refit this product or its accessories. • The device should be mounted in a dry environment. It is not designed to be used outdoors.
You should now be free to add the device to the local smart network. The issue you are experiencing is not mentioned here. Please contact us at support@logika.nz with your issue and we will do our utmost to help!