Related Manuals for FMI OUTLAND LIVING OUTDOOR LIVING PERFECTED FERNIE
Summary of Contents for FMI OUTLAND LIVING OUTDOOR LIVING PERFECTED FERNIE
- Page 1 Owner’s Manual Vertical Garden FERNIE Model number OLVG-315 D. OLVG-315.000.V0 FMI BRANDS INC. 107 – 19052 26 Avenue | Surrey, B.C. Canada V3Z 3V7 Toll Free: 1-888-514-1663 | Tel: (+1) 778-294-0988 | Email: info@outlandliving.com...
- Page 2 Owner & Safety Manual SUPPLIED PARTS & HARDWARE LIST: PART # DESCRIPTION PICTURE Model number OLVG-315 CAUTION: Watch for sharp edges. RIGHT TOP Wear protective gloves if necessary. FRAME (x1) WARNING: Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Read the RIGHT installation, operating and maintenance instructions thoroughly BOTTOM...
- Page 3 SUPPLIED PARTS & HARDWARE LIST (continued): DESCRIPTION PART # DESCRIPTION PICTURE PART # PICTURE CROSS BARS M5 NUT (x2) (x3) PLASTIC REAR LEGS PLANTER BIN (x2) (x4) BIN HANGER BLACK PLASTIC BRACKET (x8) SPACER (x8) M5x40mm DRAIN PLUG (x4) SCREW (x14) REQUIRED TOOLS: M5x16mm •...
- Page 4 Owner & Safety Manual SECTION 1: ASSEMBLY Left Bottom Frame STEP 1 Right BOTTOM FRAME: Bottom Frame Place the LEFT BOTTOM FRAME, the RIGHT BOTTOM FRAME and one CROSS BAR on a flat work surface. Ensure that the bin hanger support pegs are facing inwards.
- Page 5 M5 Lock M5 x 40mm SECTION 1: ASSEMBLY (continued) Nuts (x2) Screws (x2) STEP 4 Stand the BOTTOM FRAME (From STEP 1) and affix the REAR LEG FRAME (from STEP 3) using Rear (x2) M5 x 40mm SCREWS and (x2) M5 LOCK NUTS.
- Page 6 Owner & Safety Manual SECTION 1: ASSEMBLY (continued) STEP 6 STEP 7 Place (x8) BLACK PLASTIC SPACERS on the bin hanger Place (x8) BIN HANGERS onto the bin hanger support pegs support pegs Bin Hanger (x8) Black Plastic Spacers (x8) Black Plastic Spacers...
- Page 7 SECTION 1: ASSEMBLY (continued) STEP 9 STEP 8 Assembly is complete. Set the frame in the location where Place (x8) PLASTIC PLANTER BINS onto the BIN HANGERS you want to display it, before loading the frame with fully loaded planter bins Plastic Planter Bin (x4) Your OUTLAND Vertical Garden is ready to use indoors or outdoors.
- Page 8 Owner & Safety Manual APPROXIMATE DIMENSIONS The Vertical Garden frame measures approximately: 25”W x 19”D x 50”H (632mmW x 490mmD x 1270mmH). 25” 632mm GROUND FRONT SIDE 19” 490mm SECTION 2: PLANTER GARDENING PLASTIC PLANTER BINS planters. But, if you want to add drainage holes, we suggest using a The plastic bins are made from 100% new Polypropylene material 5/16”...
- Page 9 DRAINAGE LAYER IMPORTANT: Some gardeners recommend placing approximately one inch of drainage filler FACE THIS WAY FRONT. Ensure the (pottery, shells, gravel, etc.) at the bottom drain holes are placed front facing on of the planter bin, before adding the soil. the hangers so water drains into each This is optional.
- Page 10 Owner & Safety Manual SECTION 2: PLANTER GARDENING (continued) SOIL BUDGET ASSUMPTION: The dimensions of the planter bins are approximately 22”L x 8”W x 6”H (555mmL x 205mmW x 150mmH) 22” 555mm FEATURE: ROTATING BINS MAKE WATERING EASY AND CONVENIENT Add your preferred volume of Potting Soil Mix.
- Page 11 SECTION 4: MAINTENANCE SECTION 5: STORAGE Your Outland Vertical Garden is meant for indoor or outdoor use Your Vertical Garden has been designed to conveniently store away and requires periodic maintenance to keep it in good condition. when not in use. •...
- Page 12 WWW.OUTLANDLIVING.COM The owner’s manual is available as a free download from www.outlandliving.com Should you have any questions or comments regarding this product, please do not hesitate to contact FMI Brands Inc. at (888) 514-1663 or E-Mail to info@outlandliving.com. En-11 OUTLAND LIVING - OWNER & SAFETY MANUAL - VERTICAL GARDEN - FERNIE...