Download Print this page

Imtra PowerLED ILIM80120 Reference Manual

Dimmer

Advertisement

Quick Links

PowerLED Dimming Control
ILIM80120
Imtra PowerLED Dimmer
(See page 3)
PWM Control of PowerLED Lights
through a centralized lighting control
system
(See page 6)
Reference Manual
1

Advertisement

loading

Summary of Contents for Imtra PowerLED ILIM80120

  • Page 1 PowerLED Dimming Control Reference Manual ILIM80120  Imtra PowerLED Dimmer (See page 3) PWM Control of PowerLED Lights  through a centralized lighting control system (See page 6)
  • Page 2: Specifications

    In order to provide control of our PowerLED lighting fixtures to support various lighting applications, Imtra offers a range of dimming control solutions. Imtra’s model ILIM80120 LED Dimmer Module provides dimming for all Imtra PowerLED Downlights and supports several functions including digital PWM output and four modes of analog input including 0-10V Sink, 0-10V Sink/Source, 4-20mA, 10KΩ-100KΩ...
  • Page 3 Imtra PowerLED Dimmer The ILIM80120 PowerLED Dimmer Module is used to manually operate a circuit of PowerLED Lights with on/off and dimming control. Before making any connections, be sure all power in the circuit is turned off at the breaker. To install your PowerLED dimmer, connect the wires according to the following wiring schematic.
  • Page 4 Operating your PowerLED Dimmer and Lights • For single momentary pushbutton operation Tap any one pushbutton to turn on or off. Press and hold any one pushbutton to dim up or down. • For double momentary pushbutton operation Tap the button wired to the UP terminal to turn on Tap the button wired to the DOWN terminal to turn off Press and hold any one of the momentary pushbuttons to dim up or down.
  • Page 5 Imtra PowerLED Dimmer (0-10V) The Imtra PowerLED Dimmer Module can be used for automated control of a circuit of PowerLED Lights. The PowerLED Dimmer Module can interface with any control system that can provide a 0-10VDC or 4-20mA Analog signal. To configure your dimmer for these controls, follow these steps: •...
  • Page 6 PWM Control of PowerLED Lights Imtra PowerLED Lights can also be controlled with a Pulse Width Modulating signal. Many centralized lighting automation systems use this type of control. To control your PowerLED using a PWM signal, the wiring and signal parameters should be configured according to details below.
  • Page 7: Limited Warranty

    Limited Warranty Imtra warrants these dimming control products for 2 years from the date of purchase. If the dimmer module should cease to function within 2 years, return it to Imtra for repair or replacement. This warranty does not apply to damage resulting from actions of the user such...