Page 2
Selene 1 WARRANTY SERVICE If after reviewing the troubleshooting tips the unit will still not work, you should return it to the • Warnings & Cautions Dealer where you purchased it. They will be able to further evaluate the unit and test its various components and quite possibly will be able to identify and/or fi...
Page 3
Warranty Information Selene 1 – LP gas CO2 Generator • Titan Controls warrants the original purchase of this product against defects in material and The Selene 1 is used to create and maintain the CO2 in your growing environment. CO2 has workmanship under normal use for three (3) years from the date of purchase.
Page 4
e. If the Selene 1 fi res the burner but then turns off, check the slotted caps to see that the Installation Examples slots are pointing directly towards the Electronic Spark Ignition (ESI), then adjust the ESI mounting bracket to position the fl ame sensor in the center of the fl ame f.
Need help?
Do you have a question about the Titan Controls Selene 1 and is the answer not in the manual?
Questions and answers