Summary of Contents for P.L.Z MP-800
- Page 1 MP-800 Installation Manual Need support? Please find the user manual and contact us.
- Page 2 Unit Installation 1. Please confirm whether your DASH is suitable for the MP-800. If not, please buy the right DASH KIT for your car or modify your DASH KIT. 2. Different car models need different accessories( DASH KIT / aftermarket harness adapter/antenna adapter), you can find the correct aftermarket accessories by searching the year, make, and model of your vehicle on Amazon or Google.
- Page 3 Wire Connection...
- Page 4 Wire Connection For example: Step1: Purchase aftermarket wiring harness adapter Aftermarket wiring harness adapter NOTE: different car model has different aftermarket wiring harness adapter. General aftermarket wiring harness adapter definition NOTE: Please refer to the definition of your actual aftermarket wiring harness adapter you purchased.
- Page 5 ▶Twist matching wires together and cover the splice and unused bare wires with electrical tape to avoid short circuits. Step3: Plug wiring harness ▶Plug your aftermarket wiring harness adapter into your vehicle's factory wiring harness. ▶Plug MP-800 harness into the back of MP-800 car stereo.
- Page 6 Solution: Reconnect the wires of your aftermarket wiring harness adapter to the MP-800 harness. Please scan the QR code and find the video named "How to check if the wiring harness is correctly connected ". Car Stereo Manufacturer...
- Page 7 Make sure that your vehicle's factory wiring harness and aftermarket wiring harness adapter are securely attached. Ensure that the MP-800 car stereo plug is properly and tightly plugged into the back of the MP-800 stereo. Reason 3: The MP-800 was damaged in transit.
- Page 8 Rear Camera Installation Camera Power: Connect to the reversing light Monitor Camera Input Connect Orange back view trigger Red: Reversing Light +12V Reversing Light Black: Ground- Rear Camera...
- Page 9 Front Camera Installation Camera Input Red: +12V Ignition Switch Black: Ground Wire (B-) Front Camera NOTE: The picture is only for installation reference, front camera not included.
- Page 10 Connect Amplifier To The MP-800 2 channel amplifier Blue/Black Wire: AMP Control...
- Page 11 4 channel amplifier Divided into two sets with splitter Blue/Black Wire: AMP Control...
- Page 12 ". Car Stereo Manufacturer NOTE: MP-800 is designed to be connected to your vehicle' steering wheel control wire directly. (If you connect it to your steering wheel control box, it may not be able to support its protocol.)