Summary of Contents for Mac allister MPS750S-2
- Page 1 Pole Saw 750W MPS750S-2 EAN: 3663602627661 WARNING: Read the instructions before using the product!
- Page 2 Technical and legal MPS750S-2 MPS750S-2 information Let’s Safety warnings IMPORTANT get started… READ CAREFULLY BEFORE USE. KEEP FOR FUTURE REFERENCE. General Power Tool Safety Warnings WARNING! Read all safety warnings These instructions are for your safety. Please read through them and all instructions.
- Page 3 Technical and legal Technical and legal MPS750S-2 MPS750S-2 information information Electrical safety Personal safety 1. Power tool plugs must match the outlet. Never 1. Stay alert, watch what you are doing and modify the plug in any way. Do not use any...
- Page 4 Technical and legal Technical and legal MPS750S-2 MPS750S-2 information information jewellery or long hair can be caught in moving parts. power tool’s operation. If damaged, have the 7. If devices are provided for the connection of power tool repaired before use. Many accidents dust extraction and collection facilities, ensure are caused by poorly maintained power tools.
- Page 5 Technical and legal Technical and legal MPS750S-2 MPS750S-2 information information product may result in serious personal injury. 9. Always keep proper footing and operate the 3. Hold the product by insulated gripping product only when standing on fixed, secure and surfaces only, because the saw chain may level surface.
- Page 6 Technical and legal Technical and legal MPS750S-2 MPS750S-2 information information than intended could result in a hazardous situation. Pinching the saw chain along the top of the guide 16. Pay attention to national and local regulations. bar may push the guide bar rapidly back towards the National and local regulations may restrict the use operator.
- Page 7 Technical and legal Technical and legal MPS750S-2 MPS750S-2 information information Vibration and noise reduction Emergency To reduce the impact of noise and vibration emission, Familiarise yourself with the use of this product by limit the time of operation, use low-vibration and low- means of this instruction manual.
- Page 8 Technical and legal Technical and legal MPS750S-2 MPS750S-2 information information Symbols 4. Prolonged use of this product expose the operator to vibrations and may produce ‘whitefinger’ disease. In order to reduce the risk, please wear On the product, the rating label and within these gloves and keep your hands warm.
- Page 9 Technical and legal Technical and legal MPS750S-2 MPS750S-2 information information Wear protective gloves! Kickback! Tip contact may cause the guide bar to move suddenly upward and backwards what may cause serious injury to user. Wear slip-resistant, sturdy footwear! Contact of the guide bar tip with any object Wear safety helmet! should be avoided.
- Page 10 This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. MPS750S-2 (M_Brand Name; PS_Pole Saw)
- Page 11 MPS750S-2 Your product MPS750S-2 Before you start 1. Rear handle 17. Oil tank cap Unpacking 2. Lock-off button 18. Park stand 3. Loop 19. Locking wheel 1. Unpack all parts and lay them on a flat, stable surface. 4. Loop retainer 20.
- Page 12 MPS750S-2 Before you start MPS750S-2 Before you start Assembly 3. Loosen the locking knob (23) by turning it anticlockwise, pull the pole extension (22) out. Caution as pole may retract quickly. Afterwards tighten the locking knob (23) by turning it clockwise. (Fig. 2)
- Page 13 MPS750S-2 Before you start MPS750S-2 Before you start Saw chain and guide bar 5. Align saw chain (14) and the guide bar (13) assembly with the drive 1. Use only a guide bar (13) and saw chain (14) according to the sprocket (28) and the mounting bolt (26).
- Page 14 MPS750S-2 Before you start MPS750S-2 Before you start 7. Please make sure the tension wheel (20) is in the position as shown WARNING! Disconnect the product from the power supply before adjusting saw chain tension! in Fig.9, or else rotate it anticlockwise to make the mark on the side cover (12) be aligned with the mark on the tension wheel (20).
- Page 15 MPS750S-2 Before you start Before you start MPS750S-2 Before you start Before you start 3. Adjust the tension if you find that the chain saw (14) is too loose or 2. Unscrew and remove the oil tank cap (17) (Fig. 13).
- Page 16 MPS750S-2 Before you start MPS750S-2 Before you start WARNING! Always attach the product to the harness. Do not carry it only with your hands! NOTE: Always dispose of lubricant, used oil and objects contaminated with them in accordance with local 1.
- Page 17 MPS750S-2 Before you start MPS750S-2 Before you start Connection to the power supply (for UK 2. Double the extension cord back about a foot from the end, lead the loop through the hole (6) and hook the loop over the cable strain relief only) (5), gently tug on the cord to ensure that it is firmly secured.
- Page 18 Product functions Intended use This pole saw MPS750S-2 is designated with a rated input of 750 Watts. The product is intended for cutting limbs with a thickness of max. 180 mm. It must not be used for cutting other materials, such as plastic, stone, metal or wood that contains foreign objects.
- Page 19 MPS750S-2 Product functions MPS750S-2 Product functions Switching on/off 2. Press the angle adjusting button (11), meanwhile rotate the working head anticlockwise to the required working angle. Please note to align the mark with the scale around the angle adjusting 1. Ensure the saw chain (14) does not come into contact with button (11);...
- Page 20 MPS750S-2 Operation MPS750S-2 Operation General operation Pruning 1. Check the product, its power cord and plug as well as accessories for Kickback damage before each use. Do not use the product if it is damaged or shows wear. WARNING! Beware of kickback! Kickback can lead to 2.
- Page 21 MPS750S-2 Operation MPS750S-2 Operation WARNING! Never climb into a tree to prune! Do not Pruning stand on ladders, platforms, logs, or in any position which may cause you to lose your balance or control of the product! When pruning trees, it is important not...
- Page 22 MPS750S-2 Operation MPS750S-2 Operation device do the work, using the gripping teeth to apply minimal Thick branches leverage pressure. When cutting off larger branches three cuts are necessary. 10. Beware when reaching the end of the cut. The weight of the product may change unexpectedly as it cuts free from the wood.
- Page 23 MPS750S-2 Care and maintenance MPS750S-2 Care and maintenance The golden rules for care Sprocket wheel WARNING! Always switch the product off, disconnect NOTE: It is not necessary to remove the saw chain (14) it from the power supply and let the product cool to lubricate the sprocket wheel.
- Page 24 MPS750S-2 Care and maintenance MPS750S-2 Care and maintenance 1. Disassemble the guide bar and saw chain in reversed order from assembly. 4. Clear residue from the rails on the guide bar (13) by using a 2. Check the oiling port (25) for clogging and clean if necessary to screwdriver, putty knife, wire brush or other similar tool.
- Page 25 MPS750S-2 Care and maintenance MPS750S-2 Care and maintenance Saw chain sharpening 4. Use a chain file, whose diameter is 1.1 times the cutting tooth depth. Make sure 20 % of the file diameter is above the cutter’s top plate. NOTE: Never saw with a blunt chain. The saw chain is blunt if you have to push the product into the tree and the chips are very small.
- Page 26 MPS750S-2 Care and maintenance MPS750S-2 Care and maintenance Plug replacement (for UK only) 9. Use a depth gauge measuring instrument to check the height of the depth gauge. Depth gauge measuring jigs are available from most reputable tool merchants (Fig. 43).
- Page 27 MPS750S-2 Care and maintenance MPS750S-2 Trouble shooting Repair Trouble shooting This product does not contain any parts that can be repaired by Suspected malfunctions are often due to causes that the users can fix the consumer. Contact a qualified specialist to have it checked and themselves.
- Page 28 MPS750S-2 Recycling and disposal MPS750S-2 Guarantee Recycling and disposal Guarantee The product comes in a package that protects it against damage during This product carries a guarantee of 24 months starting from the day of shipping. Keep the package until you are sure that all parts have been purchase.
- Page 29 MPS750S-2 Technical specifications MPS750S-2 Technical specifications Technical specifications Wear hearing protection, especially when sound pressure is over 80 dB(A). The declared vibration value has been measured in accordance with a General standard test method and may be used for comparing one product with >...
- Page 30 Kingfisher International Products Limited United Kingdom 3 Sheldon Square London W2 6PX United Kingdom Declare that the product MAC 750W Pole Saw MPS750S-2 Serial number: from 000001 to 999999 Distributor: B&Q plc Complies with the essential health and safety requirements of the following...