Summary of Contents for Proteus RCP4
- Page 1 4 Button Remote Control RCP4 For Proteus Motorised Cable Reel Original Instruction Manual Version C...
- Page 2 Please Note: For the purpose of this Instruction Manual Motorised Cable Reel is abbreviated to...
-
Page 3: Table Of Contents
Contents Pairing RCP4 with MCR RCP4 Buttons and icons RCP4 Buttons and icons Connecting the RCP4 RCP4 Operational range and disconnection RCP4 Buttons and icons Buttons MCR blocked and Emergency Stop button pressed 11 RCP4 Buttons and icons CCU and RCP4 interactions... -
Page 5: Pairing Rcp4 With Mcr
The four button Remote Control (RCP4) is used to control a Crawler and Motorised Cable Reel (MCR) remotely using Bluetooth® technology. The MCR can be controlled directly without the presence of the Control Unit (CCU) after the “pairing” process has been completed. -
Page 6: Rcp4 Buttons And Icons
RCP4 Buttons and icons ▲ ▲ CRAWLER REEL 1 Status LED 2 Reel Paying Out Button 3 Reel Rewind Button 4 Crawler Reverse Button 5 Crawler Forward Button... - Page 7 2 Select Motorised Cable Reel from the list. 3 The RCP4 Control Serial Number has to be entered in the input box presented to the user. The Serial Number can be found on the label attached to the back of the RCP4.
-
Page 8: Rcp4 Buttons And Icons
RCP4 Buttons and icons ▲ ▲ CRAWLER REEL 1 Status LED 2 Reel Paying Out Button 3 Reel Rewind Button 4 Crawler Reverse Button 5 Crawler Forward Button... -
Page 9: Connecting The Rcp4
RCP4 Operational range and disconnection The RCP4 will operate up to 5 metres from the MCR. If the path between the RCP4 and the MCR is obstructed, or it is further than 5 metres, the RCP4 will disconnect. Disconnection is indicated by a short bleep and flashing green LED. -
Page 10: Rcp4 Buttons And Icons
RCP4 Buttons and icons ▲ ▲ CRAWLER REEL 1 Status LED 2 Reel Paying Out Button 3 Reel Rewind Button 4 Crawler Reverse Button 5 Crawler Forward Button... -
Page 11: Buttons
MCR to rewind the cable. MCR blocked and Emergency Stop button pressed a The RCP4 will alert a user of the cable being blocked or the MCR Emergency Stop button being pressed, by flashing the red LED and bleeping twice per second. -
Page 12: Rcp4 Buttons And Icons
RCP4 Buttons and icons ▲ ▲ CRAWLER REEL 1 Status LED 2 Reel Paying Out Button 3 Reel Rewind Button 4 Crawler Reverse Button 5 Crawler Forward Button... -
Page 13: Ccu And Rcp4 Interactions
If this happens a warning will be sounded on the RCP4 and the CCU, and they will both stop operating the MCR. The RCP4’s red LED will also flash rapidly. The keys on both devices need to be released for at least 2 seconds before normal operation can continue. -
Page 14: Charging The Battery
When RCP4 is being charged, for safety reasons it stops operating the crawler or MCR. When the LED flashes red, this indicates Low Battery. To charge RCP4, connect it to the charger using a USB cable, the LED will light orange. When fully charged the LED flashes green and bleeps. -
Page 15: Accessories
Accessories The following accessories can be purchased separately from Mini-Cam or your Local Mini-Cam Dealer. Multi Region USB Mains Power Plug Mini-Cam Part Number: PSU-005-171 USB Cable Mini-Cam Part Number: CAB-005-172 Proteus MCR Remote Control Holder Mini-Cam Part Number: ASS-004-440... - Page 16 Golborne, Warrington, WA3 3JD United Kingdom Tel: +44 (0) 1942 444555 Fax: +44 (0) 1942 273735 Email: info@minicam.co.uk www.minicam.co.uk ©2018 Mini-Cam Ltd. All rights reserved. Mini-Cam and Proteus names and logos are trademarks of Mini-Cam Ltd. Mini-Cam Ltd is Halma company.